Best Miter Saw for WoodWorking in 2019 – Guide & Reviews
Table of Contents
- Best Miter Saw for Woodworking Comparison Table
- Best Miter Saw for Woodworking: Reviews for 2019
- Reconditioned Ryobi ZRTS1143L 7-1/4 inch
- Hitachi C10FCE2 15-Amp 10-inch Single Saw
- DEWALT DW715 Single-Bevel Compound Miter Saw,12-Inch
- DEWALT DWS709 Slide Compound Miter Saw, 12-Inch
- SKIL 3821-01 12-Inch Quick Mount Miter Saw
- Buying Guide – Things to Consider
Are you looking for the best miter saw for woodworking? Here’s a list of your best options at various prices. When you’re working with wood, it’s pretty much a given that you should get a miter saw.
You don’t really need to get a multipurpose miter saw if you’re not going to use it to cut metals. The best miter saw for woodworking is more than enough for your needs. So which one is really the best?
That’s hard to say, since people all have different needs and different budget limitations. But we’ve made a list of great miter saws you should look over if your projects are exclusively with wood materials.
Best Miter Saw for Woodworking Comparison Table
Best Miter Saw for Woodworking: Reviews for 2019
Reconditioned Ryobi ZRTS1143L 7-1/4 inch
Are you new to DIY woodworking? If that’s the case, then you shouldn’t really splurge right away on a huge brand-new miter saw which you may not use after only a short while. Instead, you may want a good secondhand miter saw like this factory reconditioned Ryobi ZRTS1143L.
These units are usually those with minor defects, and they’re returned to the manufacturer.
They’re then fixed up so they work like new. Granted, they may not look perfect, but they should be fully functional. Since this is a reconditioned miter saw, it’s extremely affordable.
That low price is also due to the fact that it uses a small 7.25-inch blade. Still, that may be enough to really pique your interest in woodworking. This unit comes with a 9-amp motor, but it can send the blade spinning at an impressive rate of 5,800 rpm.
That’s powerful enough to help you achieve even powerful cuts. It can across 2 by 4-inch lumber, and its crosscut capacity is 3.5 inches. In addition, your cuts can also be very accurate.
You have 9 miter detent stops to choose from, and these preset stops are set at the most common angles. It also comes with an adjustable laser-alignment system so you can align the cutline accurately with the blade.
If you’re going to just use a miter saw for small cuts on woodworking projects, then this is the one you get. It’s very compact and lightweight so you can use it on various jobsites. It’s very affordable too.
Finally, even though it’s reconditioned it still comes with a 3 years warranty. Fiddle around with this miter saw for your woodworking projects, and pretty soon you’ll be hooked on these types of DIY jobs.
Hitachi C10FCE2 15-Amp 10-inch Single Saw
For some people, the best way to find the best miter saw is to see which one is the most popular. If you want what’s popular, then you’re going to need to take a closer look at the Hitachi C10FCE2. It’s a bestselling miter saw that’s very affordable and also full-featured.
This is a 10-inch miter saw, and it’s powered by a powerful 15-amp motor that can send the blade spinning at 5,000 rpm.
That much power coupled with the good blade makes it easy for you to work on hardwood materials. t’s very easy to use too. It miters to 52 degrees to the left and right, and it also makes bevel cuts as it can tilt up to 45 degrees to the left.
With the flip fence design, your work pieces can measure up to 5 and 21/32 inches deep and 2 and 5/16 inches high. Changing the setting on the miter scale is easy, since you can just do that by flicking your thumb. The handle is very comfortable to hold, as it’s very ergonomic and soft.
The elastomer grip also reduces the level of vibrations that reach your hand, so you can control the miter saw better to make accurate cuts. After your work, you’ll also find that there won’t be much cleanup needed because the dust collection system works so well.
It’s the lightest miter saw in its class at just 26.3 pounds. That makes it very portable. It’s durable too, and it comes with a decent time of warranty.
DEWALT DW715 Single-Bevel Compound Miter Saw,12-Inch
The DW715 is a classic when it comes to miter saws. It’s been around for about a decade now, and lots of people still buy it. It’s not outdated at all. Instead, it has only proven not just its usefulness to woodworkers but also its undeniable durability.
This features a 12-inch blade, which is powered by a 15-amp motor that delivers 4,000 rpm.
Getting accurate miter cuts is easy, since you mostly just set the miter angle at one of the 11 positive stops in the miter scale.
It miters up to 50 degrees to the left and right, and you can also use the miter detent override if none of the positive stops gives you the precise angle you want. It can deal with 5.25-inch crown molding and 6.5-inch base molding with the tall fence.
You can just slide the fence away when you’re done and you’re switching to bevel cuts.
Here you have a bevel angle of up to 48 degrees to the left, with an extra tilt of 3 degrees to the right. Basically, this is a dependable tool that lets you make repetitive cuts accurately if you’re working with wood materials.
It’s very durable, and it comes with a decent time warranty plus a free year for service.
DEWALT DWS709 Slide Compound Miter Saw, 12-Inch
If you have the budget and the passion for working, then you owe it to yourself to get a premium miter saw with advanced features. For many DIY fans, that means getting the highly-regarded Dewalt DWS709.
It may be a bit more expensive, but then you get all the capabilities you need for woodworking projects.
This uses a large 12-inch blade, and it’s powered by a 15-amp motor that can spin the blade up to 3,800 rpm. Combine that power with the innovative back fence design, and you can cut through 2 by 10-inch lumber at 45 degrees.
Cut straight down at 90 degrees, and you only need one pass to cut 2 by-inch lumber. This saw design can also accommodate 5.5-inch crown molding and 4.5-inch base molding.
The bevel and miter scales are easy to read, so it’s no trouble setting the cuts at the right angles you want.
It miters to the right by 60 degrees, and to the left by 50 degrees. It also has 13 convenient miter detents so you can set the angle easily. The accuracy of the cuts is further enhanced by the miter saw’s dual horizontal steel rails and linear ball bearings.
It’s very stable and strong since the base is made from heavy-duty aluminum. The durability of the DWS709 is also proven and backed by a decent time limited warranty. You probably won’t need it though, since it has pads on the stainless steel plates.
These pads can really reduce the wear and tear that the miter saw goes through even over a long period of time.So yes, it’s expensive. But with the features you get, you’re getting a lot for your money.
Using the DWS709 makes woodworking fast, easy, and so much fun with great results.
SKIL 3821-01 12-Inch Quick Mount Miter Saw
If you’ve gone past the beginner stage in woodworking, you need something more advanced so you can work on more challenging projects. That’s why you need to really consider the SKIL 3821.
It’s very rare to find a negative or even a neutral review for this miter saw. Just about everyone who’s used this sings its praises.
This features a 12-inch blade, with the 15-amp motor getting it to spin at 4500 rpm. With the 40 teeth in the stock blade, you really can get smooth cuts and finishes with this miter saw.
The miter angle for both the left and right is at 45 degrees, with 9 positive stops you can choose from. This is also a dual-bevel miter saw, which means it also tilts 47 degrees to both the left and right side. What that means is that you won’t need to disengage the workpiece to put in an opposing bevel cut.
With this miter saw, woodworking can be a lot of fun. Your cuts are accurate since you have a laser cutline guide and markings on the aluminum fence. The effective clamping system really keeps the workpiece securely in place.
The lock-off switch is easy to use even if you’re left-handed. The dust bag works fine. It’s very portable too. It comes with a nifty handle and it only weighs 42.5 pounds. You can easily bring this along to your jobsite if your miter saw there isn’t as good.
Buying Guide – Things to Consider
If you want to excel in your woodworking projects, you need to consider a few important things when selecting a miter saw designed for woodworking. The following are the major considerations you should think about to help you make the right purchase.
Work to Be Done
Some tasks require a particular type of saw while others actually prefer another model. For example, when the work is a lot, you will need a miter saw with large size of blades. Having a larger count of teeth which makes the cut smoother and neat.
On the other hand, thick woods require a lower teeth count and this allows the power to pass through it making the outcome satisfying. Before choosing a miter saw, you should carefully consider the target of his work he would be doing to avoid inefficiency of any kind. Large tasks may require a lot of power usage while small tasks may require lower power.
A miter saw usually blows a large amount of dust in every direction when making cuts. One should look for a miter saw with a good dust collection system, during wood cutting a lot of wood dust is thrown in the air. This can cause the workers' health problems and those around him the dust also blocks your view creating a lot of mess. Additionally, cleaning after the work is done will be tiresome and a lot of time wastage, to avoid this one should get a miter saw that has an efficient dust collector.
The quality of a miter saw determines its working ability. Miter saws of higher quality have a better performance compared to those of lower quality and if used well are more long-lasting. They are usually strong and some even have a switch that allows the blades to change from one cut to another and rotate at different angles. A woodcutter should choose a miter saw of good quality to ensure its reliability and a good outcome. The blades should be made of good stainless steel to avoid its corrosion.
YouTube Video Credit WoodWorkWeb
This is the ability of the miter saw to be transported from one working site the other. A good miter saw should be light enough and of medium size to avoid difficulty in its transportation. Heavy miter saws are cumbersome to work with since the device is usually manually operated, while the large in size ones are difficult to pot around and may lead to higher transportation cost.
Price is the utmost basic thing to be considered when buying almost anything. However, most of the time, the cost of a miter saw and its quality go hand in hand. The higher the cost the higher the quality and vice versa. The aim of a business is to make profit and one should go for the price considerate one so as to get a healthy profit in the long run. If only the cost is the factor to be considered the cheapest one should be chosen.
Above all, your health and of people around him is very important when choosing a miter saw make sure to buy the safest one. It should come with a package of safety features like a saw guard, an electric brakes and safety glasses to protect against accidental mishaps. On top of that, it should protect you from other dangers or keep debris from getting into your eyes. Firmly locks should also be ensured when buying the miter saw to avoid them from dropping or harming anyone.
The Size of the Blades.
Sizes of blades range from 7 – 20 but the most common ones are of 10 inches and 12 inches. Lager sized blades make longer cuts compared to the small sized ones. Before choosing, you should think about the kind of work he will be doing. Saws of smaller blades are usually cheaper and lighter than the ones with big blades.
The one with big blade makes more precise cuts at a higher speed spending less time cutting wood. They are usually very strong and long-lasting and can cut through thick woods smoothly. A miter saw designed with big blades can do the task of the small but it is not the case the other way round the right miter saw should be bought for a particular job.
Woodworking can be fun, but it’s a pain when you don’t have the right tools. That’s why you need to get the best miter saw for woodworking, so you can work on pieces such as crown molding. With a good miter saw in your workshop, you can work on more types of woodworking projects more quickly and with much better results.
Enter your text here...