Metersawgeek is independent and reader-supported. As an Amazon Associate we earn from qualifying purchases.This means that at no extra cost to you,we will receive a small commission if you purchase through our link.Learn more

Best Miter Saw Stand for 2020 – Reviews & Buying Guide

Are you looking for the best miter saw stand for your workshop? You can start by looking over these top 10 choices. It’s great to use a sliding miter saw since the extensions allow you to work on even larger pieces. But the problem with lots of excellent sliding miter saws is that often they’re not being used with the right miter stands.

With the top miter saw stand, you can enjoy a full range of benefits from your ideal miter saw. A perfect miter saw stand must match all your needs. It’s true that you can make your own makeshift stand, but a professionally-made stand is so much better. You’ll get more accurate cuts at the very least.

That is why we highly recommend you to read the buyer’s guide at the end of this article.

Best Miter Saw Stand – Quick Table 

You can also buy a miter saw stand that’s specifically designed for the particular miter saw model you’re using, but then if you switch to another model that miter saw stand becomes worthless.

So you need a miter saw stand that can work with many different types of models. You also need something strong, and it should be light too if you need to bring it to job sites.

Finding a miter saw stand can be a tough task if you are not sure what you are looking for. This is why we have compiled top product reviews on the market today so that it can be easy to choose the right stand for your miter saw. Check out our recommended miter saw stands.

Best Dewalt Miter Saw Stand -Reviews for 2020

For years, Dewalt has remained to be a great producer of very high-quality power tools. This has contributed to the preference the brand faces from most handymen globally. Dewalt tools never disappoint, they are built to satisfy a variety of individual customer needs. We have reviewed more products from this brand, most of them are top tools in the current market.


Rolling Miter Saw Stand

Are you looking for something portable? Then this Dewalt DWX726 may be the miter saw stand you’re looking for. It comes with mounting rails that you can easily adjust, so it can adapt to almost all miter saws out there.

If you’re bringing this along to a Jobsite, you’re in luck.  That’s because it only weighs 67 pounds, and that’s not a problem for 2 people to lift it to your vehicle. It doesn’t take up a lot of space in your vehicle either. When it’s folded, it’s only 59.5 inches wide and 17 inches high.

Once your vehicle is at the Jobsite, you won’t have to carry the stand all the way to the spot where you want to put it. That’s because it is rolling Miter Saw Stand and it uses wide rubber wheels on one end.

So you can just maneuver it to a place like a high tech wheelbarrow. When you’re at the right spot, just make sure the stand fits in the space you’ve allotted it to. It measures 98 inches wide and 32.5 inches high when fully extended.

Dewalt DWX726 is great for work, as it offers adjustable infeed and outfeed supports so it can handle up to 8 feet of material. Thanks to its durable tubular steel construction, its maximum weight capacity is at 300 pounds.

This rolling miter saw stand is quite a tough stand, and it comes with a decent warranty period. Because of its portability, strength, and compatibility with most sliding miter saws, this is great for DIY-ers and professional contractors alike.

Key Specifications

  • Tool Width – Extended: 98 inches
  • Tool Height – Extended: 32.5 inches
  • Tool Width – Folded: 59.5 inches
  • Tool Height – Folded: 17 inches
  • Tool Weight: 67 pounds
  • Shipping Weight: 75 pounds

What we liked

  • The table comfortably folds to save space, extends, and also very easy to pull around.
  • Sturdy and heavy-duty construction.
  • Has easily adjustable mounting rails thus they are easy to adapt to any miter saw available.
  • It is easy to raise or lower it also very easy to assemble.
  • It can hold any bulky weight.

What we didn’t like

  • The instructions are not straightforward.


Heavy-Duty Miter Saw Stand

Dewalt DWX723 isn’t the most expensive stand on this list. But many will think that it ought to be, after seeing the quality and the many useful features of the stand. This is a truly fine miter saw stand that upholds the Dewalt reputation for high quality.

First off, it comes with a universal design. This means it works with all miter saw brands and models.

The mounting brackets the saw uses makes it easy for you to attach and detach the saw, and while attached the saw is securely held in place. In fact, the brackets let you put in 2 saws on the stand simultaneously.

The beam extends so that it can support up to 16 feet of material. It even has flip-up material cut stops. This is a tough stand that can handle up to 500 pounds. You also have non-marring feet on the tool mount, so the material won’t get scratched or damaged. The leg log levers keep the setup easy and the stand stable.

When fully extended, the stand is 32 inches high and 150 inches wide. But you can fold it so it’s only 6 inches high and 73 inches wide. You shouldn’t have any trouble carrying this around, as the stand only weighs a mere 35 pounds.

This will last for a very long time. Dewalt DWX723  comes with a decent warranty period and a year of free service. It also comes with a 90-day money-back guarantee.

What we liked

  • Can hold quite a load of heavy materials since it is strong enough.
  • It is easily portable since it can extend and is easy to fold thus a space saver.
  • It can be placed anywhere on the rail due to its quick-release feature in the brackets.
  • The tools cannot get easily damaged since it is non-marring.
  • Works with any miter saw brand out there.

What we didn’t like

  • The mounting brackets are not heavy duty.


Compact Miter Saw Stand

Your safety should come first when you are dealing with any power tool. Many people end up getting injuries because the saw kicks or binds. Not only can this cost everything that you have done but you can end up hurt or killed. To prevent all these from happening, having a miter saw stand can make your work efficient and safe.

DEWALT DWX724 stand has a universal design that helps you work with different types of miter saws. This stand features a compact design that makes storage and transportation a bliss.

The stand features strong aluminum construction that not only makes it lightweight but also durable. Weighing around 30 lbs, you will find it easy to transport the stand to your job site.

A good miter saw stand should be sturdy enough to provide efficient cutting. This unit is designed with legs that provide superior support. You don’t expect it to wobble during work. The legs are also foldable for easy storage and transportation.

The stand has a 40-inch beam that can extend to support up to 10 ft material. It can also handle a total weight of 500bls.

What we liked

  • Lightweight aluminum construction.
  • Legs fold for easy transportation and storage.
  • Universal design work well with all miter saw brands.
  • Legs provide great support.
  • Non-marring feet prevent scratching.
  • The leg lock levers provide a fast and easy setup.

What we didn’t like

  • The stand is great but the adjustment is hard.
  • Decent stand but it could be better made.


Rolling Miter Saw Stand

Miter saws stand are great to work with because they provide portability, stability, accuracy, and make your work easier when cutting long stock. DEWALT DW7440RS is a highly rated stand that provides you with all these benefits and much more.

The stand features a lightweight design to ease transportation. It weighs less as compared to other miter saw stands on the market making it easy to carry.

The stand is designed with a heavy-duty kickstand that gives it perfect balance and keeps it upright for storage and portability.

The stand features a wide base together with offset rear legs that provide the required support and stability needed to feed materials. With the quick connect stand brackets, you will find it easy to attach and detach saw.

Folding legs reduce the size of the stand which makes transportation effortless. The legs feature quick-release levers that collapse well under the stand.

What we liked

  • Lightweight design.
  • Folding legs make transportation easy.
  • Wide base provides stability.
  • Easy to load and unload.
  • Has a lock mechanism that fits the table stand.
  • The Guard system protects your hand and fingers.

What we didn’t like

  • Quality stand but finding replacement parts is hard.
  • The stand works well but not compatible with many saws.

Best Miter Saw Stand – Reviews for 2020

We have sorted some other manufacturer’s miter saw stands apart from Dewalt miter saw stand. These miter saw stands have gained the reputation over the years by their performance.

1. Bosch GTA3800

Folding Leg Miter Saw Stand

Bosch GTA3800 is another popular miter saw stand that has earned perfect marks in just about all the customer reviews. It may be the most expensive stand on this list, but you sure get your money’s worth. First of all, this is compatible with most miter saws. It adjusts to fit in saws of various sizes.

It even matches up with miter saws with irregular bolt patterns, such as the Hitachi C12RSH. 

With the quick-release lock, you can attach and detach the saw to and from the stand easily and quickly. Once the dual sliding rails are fully extended, it will reach a length of 12 feet and 9 inches, so it can support up to 16 feet of material.

So you need to make the user that you have the workspace to accommodate this. Bosch GTA3800 quite helpful for your work, as it offers a fast and easy setup so you can make repetitive cuts of the same length. 

If you’re planning to bring this to another location, all you need to do is to fold the legs up so it’s like a folded umbrella or camera tripod.

You can then just grab the handle to carry it with one, as it only weighs about 58 pounds. You can also move the stand along with the attached saw as it features 2 wheels on one end. 

All in all, this is a handy stand that should accommodate miter saws designed to match up with stands. (Some can’t, as they’re only designed for benchtops).

The aluminum construction makes it both strong and light and it should last you for a long while. Bosch GTA3800 comes with a standard decent warranty period.

What we liked

  • Solid arms and legs thus it holds heavy things so well.
  • Smooth bearings thus there it causes less injury.
  • When folded it has outstanding compactness.
  • Quick to transport since it has an ergonomic one-handed design.
  • Can accommodate differently sized saws since it has flexible roller material.

What we didn’t like

  • The saw is heavy thus there is gawkiness when it comes to balance.
  • It has lesser diameter wheels thus navigation stairs are a bit troublesome.

2. Hitachi UU240F

Heavy-Duty Portable Miter Saw Stand

What if you’re working with huge miter saws and heavy materials? If that’s the case, then the Hitachi UU240F may be best for you. It’s really designed for heavy-duty work, and the tough steel used for its construction can support up to 400 pounds. It can accommodate even large 12-inch miter saws.

It has universal auxiliary mounting brackets so you won’t need an extra mounting surface. 

It’s easy enough to mount and remove the saw from the stand, because of the quick-release brackets. 

It also has non-marring rubber feet on the mounting brackets. This means you can remove the saw from the stand and you can put the saw on any finished surface, and you won’t scratch the finish.

The stand weighs 50 pounds, but you really don’t have to carry it except when you put it in and out of your vehicle. On one end you have 2 wheels that measure 8 inches in diameter, while the other end has a convenient handle. So you’ll just need to pull it to where you want to put it.

When you’re using this stand, the work supports can extend up to 95.5 inches, so you can accommodate longer material if you ever need it. The setup is easy and fast, and you don’t even need tools. You also have installed adjustable material stops so you can make accurate cuts repetitively.

As for durability, don’t worry. After all, this stand can handle up to 400 pounds, remember? The warranty period is decent, and in all probability, Hitachi UU240F can last much longer than that. It’s very affordable too.

What we liked

  • Rubber feet to prevent damage to the surface.
  • Has adjustable stops.
  • Can be easily adjustable thus easy to set up.
  • Heavy-duty material.
  • Affordable.

What we didn’t like

  • Has to be stored lying flat.

3. PM-4000 Portamate

​Folding Miter Saw Stand

PM-4000 Portamate folding miter saw stand from HTC is the most affordable stand on this list, and you can probably understand that when you see its very basic design. Yet even though it doesn’t have the bells and whistles you can find in other stands, it offers a lot of features that you’ll surely appreciate.

HTC PM-4000 designed for just about every makes and model of miter stand in the market today. 

With the quick-mount tool attachments, it’s very quick and easy to attach and detach the saw.

Though the price is apt for budget-conscious home users, the quality of the stand is actually contractor grade. The tubular steel construction is designed to handle up to 500 pounds of material. With the material supports extended, you can support 116 inches of material. That’s about 10 feet long.

It comes with a tough powder-coated finish, while the foldout legs offer total stability while you work. The height of the stand is also set at 36 inches high, which is an optimal height for most people and most projects.

It’s also very portable, as you can just fold the legs when you carry it. If you want, you can also buy the upgrade so you can move it along on two 6-inch wheels. As it is, it’s the perfect miter saw stand for no-nonsense workers. It’s tough, stable, and extremely affordable.

What we liked

  • Has comfortable height and can be adjusted to any height.
  • For secure storage has folding legs.
  • Is very stable even when in use.
  • Heavy-duty material.

What we didn’t like

  • Difficulties in mounting the saw to the brackets.
  • Clamp happens to be lower than the snap on the rails.

4. Bosch Portable T4B

Gravity-Rise Wheeled Miter Saw Stand

A miter saw stand is a necessity in your carpentry or woodworking business. Using a miter saw stand improves your efficiency and safety when you are handling various projects. If you would love to work with quality and sturdy miter saw stand, try the Bosch Portable Gravity stand.

The stand is adjustable since it is designed with a patented gravity rise system for easy setup and breakdown.

This helps you to tackle even the hardest job at hand. The saw is portable so you can transport it to different locations. It features 8 built-in pneumatic wheels for easy transportation.

In regards to capacity, this miter saw stand from Bosch can hold up to 18 feet of material. This is the highest capacity in many portable miter saws. You can use the stand with a wide range of miter saws. Bosch T4B Gravity-Rise features rapid release tool mounts that make it versatile.

The saw stand is also designed to last long. With its adjustable leveling feet, you can get stability and durable performance even when working on uneven surfaces.

What we liked

  • The stand has the highest material capacity.
  • It is sturdy and durable.
  • The stand is adjustable.
  • Pneumatic wheels promote easy transportation
  • Works well with many miter saws.

What we didn’t like

  • The stand makes work easier but it is pricey.
  • Excellent stand but finding spare parts is tricky.

5.  Ridgid AC9945

Miter Stand Utility Vehicle

Adding a miter saw stand to your arsenal can be a great decision. There are so many stands out there but not all are suited for the task. Before you buy one, you need to ask yourself several questions like, what kind of projects are you dealing with? How often do you want to use it? How are you using your miter saw? Answering these questions can help you get a more specific stand to match your needs.

If you need a space-saving stand, I would recommend the Ridgid AC9945 Miter Stand Utility Vehicle. His stand is designed with a space-saving support leg. The support leg has a height-adjustable system to suit your requirements.

Moving the stand to different positions is easy. The multi-grip position of the transportation handle provides maximum comfort and good balance during transportation.

With this stand, you can easily position the saw from any side of the stand. This helps you to achieve an optimal length of cuts. The stand also features a heavy-duty steel construction to enhance its durability.

What we liked

  • Compatible with many sliding and compound miter saws.
  • Made from heavy-duty steel construction makes it durable.
  • Upright feeding design makes it easy to store.
  • The support leg features a height adjustment system.
  • Easy to transport with the multi-grip transportation handle.

What we didn’t like

  • Great miter saw stand but not suitable for professionals.
  • It would have been better if assembly instructions were provided.

6. TC portamate PM7000

Heavy-Duty Contractor Grade Miter Saw Stand

Do you need a miter saw stand? Well, if you have been having trouble cutting different materials, having a miter saw stand can make your work easier. You want to make sure that you get a quality miter saw stand that will work well and last longer.

This is why I recommend the HTC portamatePM7000. This is a great stand for DIY lovers and contractors.

It features a heavy-duty construction so you have no worries about its durability.  The stand is designed with universal quick mounts so you can use it with miter saws, scroll saws, hand saws, planners, and much more.

This stand is equipped with many features that enhance its use. You will find front lumbar legs storage racks and a storage compartment where you can keep several items.

If you have a limited area for storage, this is the right stand to get. It has a foldable design that makes transportation and storage hassle-free.

What we liked

  • Compatible with different types of saws.
  • Equipped with work light and vise.
  • Heavy-duty construction makes it durable and sturdy.
  • Storage space to hold your items.
  • Folds easily for convenient storage and transportation.

What we didn’t like

  • High quality stands but you need muscle to move it.
  • The light included is small and not very bright.

Best Miter Saw Stand – Buyer’s Guide

Do You Really Need a Saw Stand

Do you really need a miter saw stand? Could you be a woodworking novice figuring how a miter saw stand could improve your projects?

No doubt, some would opt out of such an important stand. The good news is; a stable solid miter saw stand could be all the difference you have been craving for when it comes to the finest cutting work.

This post explores the importance of using a miter saw stand and how you can utilize it and much more. Let take a quick informative in-depth look.

Why you need a saw stand

Firstly, a reliable miter saw stand significantly improves the results of your projects, and the ability to deliver more output.

Therefore, understand what your projects are all about and identify a miter saw stand that suits your expectations. This will ensure you have exactly what need to boost your productivity. You have no idea what other things you could be missing?

Well, without much of the ado, this is why you need to engage a miter saw stand your upcoming projects;

  • Imagine cutting specific angles using your compound miter saw! For your perfect framing needs, an appropriate miter saw stand will provide a stable surface for accurate cuts. Furthermore, you able to do this without straining and save time for high productivity.
  • The table provides a platform to make predefined angles or a surface to create markings as you do the alignment before cutting your material. Impressively, with a stand, you can wipe off such markings later.
  • With a miter saw stand, you have a surface where you can do your measurements effortlessly.
  • How about when accommodating long pieces of material? An appropriate miter saw stand will enable you to do the squaring, supporting and feeding of materials to the cutting saw, without grounding your work. This is why it is imperative for you to have a long stand.
  • A specialized miter saw stand will enable you to get the most out of your miter saw without any risks of injuring yourself or those around your workspace.
  • A miter saw, provides a raised ground to comfortably handle your work, at arm’s length without the possibility of experiencing back pains, if you were to operate from the ground.

Factors To Consider

For a miter saw stand to serve you better, ensure in your basement, garage shed or any other workstation has enough space. This will conveniently give you enough location for the stand and move around without any hindrances.  A foldable miter saw stand will be ideal for those who don’t have enough space.

Additionally, you will save unnecessary costs due to material wastage especially when you awkwardly square or support your work. This includes improper feeding of your pieces of timber to cut out the corners

Lastly and importantly, consider using a miter saw stand versatile for the diverse tasks ahead of you. Today the market is awash with creative designs, models, and sizes you can choose from too. This is why a miter saw stand is such a great deal for you.

Miter Saw Stand Tips:

YouTube Video Credit: Chad Stanton

Final Verdict

It should be obvious by now that you really need a top miter saw stand for your workshop. With the right stand, you can make full use of your miter saw, and you can also bring it along to your various jobsites. Whether you’re a home DIY enthusiast or a professional contractor, you need one right now if you’re going to use a miter saw.

Our top picks for the best miter saw stand is DEWALT DWX726 Rolling Miter Saw Stand because It’s easy to store, easy to carry and the great part is, it can adapt to almost all miter saws out there in the market.

Relevant Resources

Last update on 2020-10-27 at 14:32 / Affiliate links / Images from Amazon Product Advertising API

Alvin V.Stone

I’m a DIY enthusiast and run a woodshop. I created this blog to provide you with reliable information concerning power saws so that you can do your work best. Not only do I provide power saw guide and reviews but also other resources that help you take your projects to a higher level.