Best Miter Saw Blades for 2018 – The Ultimate Buyer’s Guide & Reviews
- 1 Best Miter Saw Blade Comparison
- 2 5 Best Miter Saw Blade Reviews
- 3 1. Amana Tool A.G.E. Series MD12-106 Heavy Duty
- 4 2. DEWALT DW3128P5 80 Tooth and 32T Kerf
- 5 3. Freud D12100X 100 Tooth Diablo Ultra Blade
- 6 4. IRWIN Tools Classic Series Steel Blade
- 7 5. Freud D1060X Diablo 10-Inch 60 Tooth
- 8 Choosing the Right Miter Saw Blade -Things to Consider
- 9 Frequently Asked Questions (FAQ)
- 10 Final Verdict
- 11 Relevant Resources
Looking to buy the best miter saw blades for your woodcutting projects? Your best bet is to pick among these top 5 options.When miter saws first came out, they weren’t really all that good.That’s why professionals and DIYers who prioritized accuracy over portability weren’t all that taken with them.
Nowadays the quality of premium miter saw blades is terrific. The only problem is that often the saw blades that come with these models aren’t all that great.That’s why after buying an excellent miter saw, most people follow it up by buying the best miter saw blade for their saw.
Admittedly, it’s not that easy to pick the right blades among so many options. In fact, some folks just make sure that it comes in the right size for the miter saw.That’s because there are too many factors to consider while choosing saw blade, and even professionals can get a bit confused.
Best Miter Saw Blade Comparison
80 & 32
Tungsten & Carbide
Carbide & Titanium
5 Best Miter Saw Blade Reviews
This blade measures 12 inches, so it’s designed for smaller sliding compound miter saws. It’s another fine example of German engineering and manufacture.
You don’t have to worry about build quality, since it’s not made in a country where cost-cutting is more important than the quality of the product.
With this blade, you can expect a terrific finish whether you’re working on soft or hard wood materials. With the 100 teeth on the blade, you can make finer cuts, and it’s ideal for making crosscuts on natural wood. It’s a MD12-106 Heavy Duty blade, so it’s great extra-fine crosscutting for solid wood.
But you can also use it for crosscutting and rip cutting on manmade materials like medium-density fiberboard and plywood, which usually don’t feature a well-defined grain structure. It doesn’t result in chip-out even with these materials.
It features a -3 degree hook, so the blade doesn’t bite the material aggressively and doesn’t “climb” the wood. This is well-suited for sliding miter saws, so you can work more safely.
The thin kerf blade reduces the amount of material you waste when you make your cuts, and it also doesn’t require too much horsepower to spin. It also features laser cut expansion slots, so the blade can expand and contract from the heat, which keeps the blade from warping.
The blade comes with very large carbide tips, so you can resharpen the blade more times before you need to replace it. It actually comes with a limited lifetime guarantee.
All in all, it offers smooth cuts and a long life. With the MD12-106 Heavy Duty, you get an industrial-grade blade with its homeowner price tag.
What we liked
What we didn't like
Dewalt makes excellent miter saws, so it’s not surprising that it also makes terrific miter saw blades. This Dewalt DW3128P5 12-inch blade set is quite popular, as it can be used to make fast, accurate, and smooth cuts on a wide variety of materials.
You can use it on chipboard or plywood, and on soft and hard woods.This set is actually a pair of blades. One comes with 80 teeth for extra fine cuts, while the 32-tooth blade is
More suitable for rip cutting. They’re both thin kerf blades, so you don’t need as much horsepower to spin them. You also don’t end up with a large amount of wasted material turning into sawdust.
The blade tips are made of tungsten and carbide, so they stay sharp for a longer time and you won’t have to resharpen the blades too frequently.
The blades also feature a plate precisely balanced by a computer, so you don’t get as much vibration. This provides you with a better finish for your cuts, and the accuracy of your cuts doesn’t suffer.
The two blades have more steel behind each blade tip, due to the wedge shoulder design. With that much steel behind the tips, the blades are less likely to break, and you get a lot of precision too.
What we liked
What we didn't like
This is one of the most popular blades for 12-inch miter saws, and just about every customer review for it has sung its praises with perfect scores. It comes with a premium price tag, but the premium features are fantastic.
First of all, you don’t have to worry about getting fine cuts. With the 100 teeth on the blade, getting superfine cuts isn’t exactly a problem.
It’s like using a heated samurai sword on butter. You won’t get any fraying even with hardwood materials. Your cuts can be so thin that you can see through the slivers of wood. They’re also so smooth that it’s as if the wood has already been sanded by ultrafine sandpaper.
With the design of the blade, delivering these cuts doesn’t take much effort. You don’t waste as much material and you really optimize the effectiveness of your miter saw.
The design also features stabilizer vents cut by lasers, which reduce the vibration to keep the blade steady and your cuts accurate and smooth.
These vents even trap the noise so you don’t create a ruckus every time you’re working.Don’t overanalyze why this Freud D12100X. Just get one for your miter saw, and you’ll feel and see the difference right away.
What we liked
What we didn't like
Lots of woodcutters like to stock different blades for different purposes, and that can be an expensive collection if you stick with premium blade brands. But this Irwin blade is extremely affordable, so it really should fit even a modest budget. This is a 10-inch blade with ⅝-inch arbor.
It offers 180 teeth (count them if you want), and it’s made of heavy-gauge, high-carbon steel.It’s tough enough to cut through mild steel without even causing sparks to fly. It’s also tough enough to last for a very long time.
With the thin kerf design (0.09" kerf), your cuts are very smooth and accurate, and you keep the wasted material from your cuts to a minimum. It features a fully hardened plate, so it will run true for a longer period of time.
So do you tend to cut lots of metal sheets? If that’s the case, then these Irwin blades will do the job cleanly and quickly. At this price range, it’s an absolute steal.
What we liked
What we didn't like
The Freud D1060X s designed for 10-inch miter saws, and it’s a definite upgrade on most stock blades you find on brand-new miter saws. First of all, this features 60 teeth, and they’re made with high-density carbide and titanium. The blade also comes with “tri-metal brazing”.
Basically, all these features mean that the tips are resistant to impact, you get a fantastic finish to your cuts, and the blade will last for a very long time.
It endures against wear and tear very well, and it actually maintains the sharpness of the blade 4 times longer compared to standard carbide blades. In fact, the blade comes with a limited lifetime warranty.
The blade is coated with Non-Stick Perma-Shield, so it’s resistant to heat and it also reduces pitch buildup. It comes with an extremely thin laser-cut kerf, so the cuts are clean and very fast, and you don’t end up with lots of wasted material.
With the ATB designation, it also means you can make very fine crosscuts even on hardwood materials. You get ease of feed that makes it easier for you to control the position of the blade, which again makes it more accurate in making cuts.
You also have laser-cut stabilizer vents that minimize the vibrations when you work. This allows you more control over the miter saw, and you also feel more relaxed. Then vents also minimize the friction and the warping of the blade. In addition, these vents reduce the noise too.
If you’re working on pine, oak, and melamine, this is a great blade to have. It’s also useful for cuts on delicate molding and veneer plywood.
What we liked
What we didn't like
Choosing the Right Miter Saw Blade -Things to Consider
If you want to get the required precision and accuracy when handling your woodworking projects, the secret is having the best miter saw blades. There are different types of miter saw blades out there all designed to handle specific projects.
It is important if you know a few things about the blades so that you can pick the best for your projects. This is why I made this guide to help you know how to choose the right miter saw blade.
Saw Blade Types
The first thing that you need to know before you make your purchase is that there are different types of miter saw blades. The type of saw that pick will highly depend on the type of project you want to do. The following are some of the most common types of blades available.
- Reciprocating saw blades- Perfect if you have a reciprocating saw. These blades are ideal for cutting drywall, wood, metal and much more.
- Circular saw blades- The blades are great for tilting work. They can be used to cut through masonry, wood, and metal.
- Fine cut blades-Perfect for laminated chipboards, plywood, wood core plywood and much more.
- Course cut blades- The blades are ideal for boards, softwood, and hardwood.
- Very course cut blades- the best pick for hard materials like metal and masonry.
Saw blades are also available in different materials. Most of them are made of steel. Blades made of steel are a bit expensive and they get dull quickly. You can also get carbide tipped blades that are also expensive and long-lasting.
Another type of blade material that is common is blades with an industrial diamond finish. They are perfect for ceramic and masonry tiling.
Size and Thickness
It is also great if you consider the thickness and the length of the saw blade. For instance, if you want a blade that can cut faster and sharper, consider a thinner blade. If you want a durable blade that can cut through metal, go for a thicker blade.
You can get the blades in different sizes from 5 inches to 12 inches. Each size of the blade is suitable for a specific saw. It is important if you check the documents that come with your miter saw so that you can know the right blade size to pick.
Type of Teeth
This is also another important consideration to think about when buying the best miter saw blade. If you prefer larger cuts, look for a miter saw blade with fewer teeth.
The teeth are also available in different types ranging from flat top teeth (perfect for ripping wood), top bevel teeth and combination teeth (perfect for ripping and cross-cutting).
What Type of Saw Do You Have
You also need to know the type of saw that you have. In as much as you can use the blade in more than one tool, it does not apply always.
Do you have a circular or a table saw? Every saw has a specific type of blade that is recommended. You can check the packaging or on the blade to help you know which one will work fine.
Selecting the best saw blade gives you success when handling woodworking projects. After going through the above guide, I believe you will not have trouble picking the best miter saw blade.
Whether you are cutting hardboard, plastic, plywood or any other material, you can easily select the best saw blade for that particular task. I would recommend spending money on a quality saw even if it is a bit pricy.
In the long run, it will save you greatly from wear and tear so you will not have to make frequent replacements.To help you out, here are some excellent options you can pick from so you can get to work with your miter saw right away.
Frequently Asked Questions (FAQ)
1. What saw blade to use for ripping?
Saw blades are made to do different cutting operations. There are different types of them. It is important for one to make the right choice. When doing ripping, a rip blade comes in handy since it has flat top teeth which are used for ripping woods that are both soft and hard.
2. Which circular saw blades to use?
A circular blade with high speed provides excellent service because it produces less sawdust and produces clean cuts. This leads to less materials wastage.
3. Are more teeth on a saw blade better?
A blade with more teeth provides a fine and smooth finish on the edges of the wood while producing less dust. There is also minimal material wasted.
4. Can you use a miter saw to cut metal?
You can cut metal using a miter blade if you use the correct blade. Carbide blades are the best for cutting aluminum. However, more wearing out will occur when it is used to cut metals of a large amount.
It’s great that you spend a lot of time checking over your miter saw options so you can pick the best model for your workshop. But it doesn’t make sense to buy a terrific miter saw with advanced features only to settle with the mediocre blade that comes with it.
So to take full advantage of your great miter saw, you need to pick the best miter saw blades as well. The right blade can make your end results look better, and you can work faster, easier, and more efficiently. The right saw blade can make a woodcutting project a pleasure, instead of a chore.