Best Table Saw Blades of 2019 – Top Picks, Reviews & Buying Guide

Table saws are considered to be the most versatile tools available for woodwork. They can cut through any material, from wood to wood composites, particleboards, hardboards, MDF, and plastic laminate. They can also make a range of cuts ranging from rip cuts to crosscuts and even miter cuts.

Since many table saws comes with a particular type of blade, you may consider to replace the blade after sometime to suit your needs and the material you are cutting. Selecting a quality table saw blade can be an overwhelming task. You need to consider several factors like the material size and thickness among others. In this article, we will cover the best table saw blades that you can check.

We will cover their individual features and how they are suited for the job. We will also consider the elements you should think about before picking a table saw blade. There are also frequently asked questions that you also might have and this article deals with them extensively. This way, you get to be well-informed before purchasing a table saw blade.

Our Top 10 Table Saw Blades Comparison

Best Table Saw Blade -Reviews for 2019

Finding a quality table saw blade can be daunting if you have no idea where to begin. Since you don’t want to make guesswork purchases, you can read through our expert reviews to make you informed before you buy. Check these reviews in details to find which table saw blade is suitable for you.

1. Forest ww10407125 woodworker 11

       10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

The Forest ww10407125 woodworker blade lands as our top pick because typically it’s the right table saw blade you can get for your tool. As many quote it as the Cadillac of saw blades. With its 10-inch standard size blade, it's compatible with several different table saws from various brands.

The blade comes with 40 individual teeth which are located around the sides. The 30-degree Alternate Top Bevel teeth aid the blade to come to a full stop immediately after the power is switched off.

Furthermore, the handmade materials and craftsmanship add to its value, making it stand out from the many other ordinary table saw blades. The carbide teeth are secured explicitly to the machine's plate by hand, plus the tensioning.

This table saw is specifically designed to reduce splintering, which can occur occasionally. Also, its design reduces the jump, which normally occurs when moving the wood. The kerf design helps to prevent wood loss while working.

What we liked

  • Provides superior and smooth cuts.
  • The blades operate silently.
  • Provides polished cuts on wood.
  • Made with a durable material.
  • It can cut up to 2 inches thick.

What we didn't like

  • It moves too fast, which can burn some weak types of wood materials.
  • Though this blade is the best, it’s very costly to those who would love to try it.

2. Freud 10"×24T Thin kerf Rip Blade (LU87R010)

This impressive 10" blade is not only perfect for professional work but also great for domestic users. The fact that you can rip boards to width in case you are working with large pieces of wood materials makes it a good choice for anyone looking for that precise feature. This is made possible with the few teeth on the blade. It is also designed to manage thin and thick materials as well as rip hard and softwood materials.

The blade is designed to give you convenience while working as it minimizes vibrations but at the same time maximizes productivity. It is also compatible with several table saws, as well as miter saws. The perma-shield none stick coating helps to reduce heat during working operations.

If you are looking for a blade that will give a smooth finish, fast and easy cuts,then the Freud 10-inch is highly recommended. With reduced chatter and noise, you get a more convenient work experience plus comfort while making each cut.

Its 24 teeth are made with tips created from an application Specific Tico high-density carbide (ripping blend). This ensures heat resistance and maximum corrosion, improved hardness, and density significantly.

What we liked

  • Nice blade that provides maximum performance.
  • Has a non-stick coating to minimize drag.
  • Designed with a thin kerf for faster feed and reduce waste.
  • Works well with soft and hardwood.
  • Shield coating reduces friction and build-up of heat.

What we didn't like

  • It doesn't work well on laminates and chipboards.

3. Concord Blades WCB0438T040HP

       4-3/8-Inch 40 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

These blades are capable of slicing through hard and softwood easily without any problems. You can also fit them to various popular circular saws, table saws, miter saws, chop saws, and hand saws. They are very compatible with an RPM of a maximum of 5,500.

This bad boy comes with expansion slots capable of eliminating heat expansion that can cause damage to wood materials. Also, it is designed with the vibration and noise reduction properties that make operating the blade very comfortable. This will help you get work done fast, and you will enjoy it without a fuss. You will get to enjoy all this at a reasonable budget compared to other saw blades.

They feature a thin kerf design and a very durable coated finishing which won't require regular maintenance. They not only cut through hard and softwoods but also cut through abrasive and exotic woods efficiently, giving you very clean cuts through each different materials.

The thin kerf also offers a perfect finish without wasting a lot of material. It gives a professional quality cut that will make you proud of your work even if you are just an amateur. The 20mm at arbour with bushing helps to reduce arbour size to 5/8".

What we liked

  • Steel blade with shaft titanium tips.
  • Work well on different saws.
  • Nice blade for floor cutting.
  • Has a thin kerf to provide smooth finishes.
  • Provides professional quality cutting results.
  • Perfect for ripping and crosscutting.

What we didn't like

  • The blade dulls fast.
  • It gets many burn marks.

4. IRWIN Tools Classic Series Steel

        Steel Table / Miter Circular Saw Blade, 10-Inch 180 Teeth

Are you looking for the best grinding table saw blade with other different types of woodworking applications? Well the IRWIN tools classic series steel table blade could be just what you are looking for. It comes with a solid plate at the center that goes to the sides. This plate is durable and has an exquisite finish that will give the blade long life.

Unlike other table saw blades on our list, this baby features 180 individual teeth which are quite sharp when touched. They are precision ground, and this ensures that each tooth is practically the same size and sharp enough as that next to it. They also offer a smooth finish and accurate cuts to your materials.

The blade is designed with a 0.09" kerf which ensures perfect finishes with less material waste. The heavy-gauge, high carbon steel construction makes the blade efficient and durable.

The blade is also an affordable option if you are looking for something that can fit your budget. The fact that it's durable makes it stand out among its competitors.

What we liked

  • Quality high-carbon construction makes it durable.
  • The blade provides smooth and accurate cuts.
  • Has a fully hardened plate for true runs.
  • Cuts metal roofing sheets easily.
  • Good for the price and long-lasting.

What we didn't like

  • Its speed is not steady enough to be used with some saws.
  • The teeth tend to break away from each other and come off during heavy operations. This may require regular maintenance to keep them steady.

5. Irwin tools 1807370 Marples laser cut

        10-Inch 80-Tooth Hi-Alternate Tooth Bevel

If you are looking for a saw blade that will give you both crosscuts and rips, then we highly recommend the Irwin tools 1807370 Marples blade. It features a mix of small teeth plus gouges that are capable of removing excess wood shavings. The blade features extra-sharp and oversized teeth that re-sharpen to extend its life.

The blade has a laser-cut, and with this, you get a high degree of precision on the blade plus flat edges of wood materials. The blade is not only great for your table saw, but also perfect for your miter saw. Another great thing about the blade is that it is precision tensioned so give you with cuts that you desire.

Its individual 80 teeth are great when you need those cross cuts through thick, dense timbers. It features an ATB angle of 30-degrees, which help reduce the risk of the tear to your wood material. With this, you can get perfect finishes.

What we liked

  • Provides ultra-smooth cuts.
  • Carbide teeth are extra-sharp and maintain sharpness longer.
  • The blade is precision tensioned to provide the best cuts.
  • Has a heat-resistant coating that reduces gumming.
  • The blade is easy to clean.

What we didn't like

  • The blade tends to wear out quickly.
  • It gets dull quickly.

6. DEWALT DW3106P5 general purpose Blade 10"

        60-Tooth Crosscutting and 32-Tooth General Purpose  

If your one who likes attractive offers, the Dewalt Dw3106p5 blade has got the thing for you. It comes with two blades at the price of one, what's more, amazing is that the two blades are both designed to give different cuts. They are both 10-inch with one specifically designed with 60 teeth for the best quality crosscuts as well as the other which is made of 32 teeth for ripping and other general-purpose tasks.

The teeth have an exclusive wedge shoulder design which gives each tooth a small shoulder behind each other. This design provides strength to each tooth during operation, and this will give you perfectly finished cuts with smooth surfaces with a little chipping and splintering along the edges.

The perfect balance plates created by computers was well thought of by the manufacturer. This reduces noise and vibrations, it also lets you get accurate and the best finishes on your projects. If you have a slide miter saw or a miter saw, this is an ideal blade to get.

What we liked

  • The blade stays sharp longer.
  • Provides accurate cuts and better finishes.
  • Works well with miter saw and slide miter saws.
  • Has a thin kerf to provide smooth cutting.
  • Designed with a heavy-duty material.

What we didn't like

  • Once you regularly sharpen the teeth, they tend to wear out fast after a few stages of doing so.
  • The blades have been noticed to not being effective and efficient in producing fine work by several users.
  • The blades have a thinner thickness compared to others on our list.

7. Freud Premier Fusion General Purpose Blade

       Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate,          veneered plywood, hardwoods & melamine.

Freud is one of the giant manufacturers of saw blades that are recognized continuously on the market today. They always deliver when it comes to making some of the best blades and the premier fusion general purpose blades are no exception. The blades feature a Freud-fusion Trio tooth geometry, which starts with a 30-degree Hi-ATB grind locate at the top of the tooth plus a double grind at the sides.

The teeth of the blade receive an axial shear face grind on the face of each tooth. This reduces amp drawn from your saw by up to 35% plus, it will increase feed speed of up to 30%.

You don't have to worry about durability as the blades feature Tico High-density carbide. This gives the blade a sharper edge and a longer life. They feature a non-stick perma-shield coating which also adds more life to the blade by decreasing drag and also protects it from corrosion build-up or pitch.

Freud premier fusion blades come in sizes of 10-inch and 12-inch. They are also made to be used with radial arm saws, sliding miter saws and table saws. They smoothly glide through with material plus they also provide flawless crosscuts and rip so you don't have to be stuck on one type of cut.

What we liked

  • Provides a longer cutting life.
  • Cuts through materials with little resistance.
  • Non-stick coating protects the blade from corrosion.
  • Anti-vibration slots minimize vibration.
  • Good blade for the price.

What we didn't like

  • Nice blade but gets dull quickly.
  • Not ideal for rip cuts.

8. Diablo D1050X Combination Saw Blade

The Diablo D1050X is a blade that features the best features, suitable for multiple cutting movements. The user might not need another blade once they have this blade in their toolbox. This is a combination blade, mixing the functionalities of an FTG and ATB blade. The Diablo blade features 50 teeth that are 10 inches wide, making it the ideal blade for ripping and crosscutting through wood material. It provides clean and accurate cuts which do not need repeated sawing off to shape them into the desired shape.

The Diablo D1050X has teeth that are close together to make it ideal for crosscutting. At intervals of 5 teeth, there is a large gullet that allows the user to do a ripping job at a fast rate without pausing in order to remove debris. It also makes it easier to remove debris from between the blades so that the user can get right back to work.

The Diablo D1050X is a thin-kerf blade and has laser-cute vents that trap noise and vibrations, preventing heating up of the blade that could lead to distortion of the blade, which would affect the quality of the cut. The blade is made of micrograin titanium carbide and features shock-resistant brazing that enables the blade to withstand a lot of impact without distorting.

What we liked

  • It has a thin-kerf and is ideal for saws which do not use a lot of power.
  • Titanium carbide blade that is sharp and withstands a lot of pressure.
  • Laser-cut vents for heat dissipation.
  • Deep gullet that collects debris, ideal for ripping motion.
  • It makes clean, accurate cuts at one try.

What we didn't like

  • The FTG teeth do not have a steep bevel.
  • The rake teeth angles are aggressive and require care when making delicate cuts.

9. OVERPEAK 7-1/4 Inch 60 Tooth Framing Carbide Saw Blade

        with 5/8 Inch Arbor and PermaShield Coating

This blade from Overpeak is made out of high-quality tungsten carbide material. This makes the blade highly durable for cutting through any thickness of material for long lengths of time without warping or breaking. The blade features a lifespan that is 5 times longer than that of other blades of its type.

The teeth formation on the blade is ATB and the diameter of each tooth being 7.25-inches. The ATB tooth formation makes for straight, clean, and accurate cuts. The number of teeth makes the blade suitable for making crosscuts through many types of material, including wood, wood composites, plastic, and aluminum. This makes the Overpeak blade a great and versatile buy for the money.

Added features of the Overpeak blade include a Perma-Shield coating that protects the blade from excessive friction with the material. This way, the blade slices through the material easily, reducing the amount of corrosion. This protects the blade and makes it longer-lasting. There are also laser-cut vents that get rid of noise and vibration.

The reduction in vibration levels keeps the blade steady so that it can make smooth cuts. This makes it suitable for cutting even through thick materials accurately. The vents also allow air penetration so that the blade remains cool even when the heat is produced from the friction. This helps the blade maintain its shape and makes it highly durable.

What we liked

  • A tungsten carbide blade gives the blade a long lifespan.
  • It has laser-cut vents to eliminate vibrations and sound for efficiency in cutting.
  • Perma-Shield coating protects the blade from excessive friction.
  • The teeth formation makes the blade suitable for making crosscuts and other kinds of cuts.
  • The cuts are clean, and the material does not need a lot of sanding afterward.

What we didn't like

  • The blade doesn’t square.

10. Freud 80T Ultimate Plywood & Melamine Blade

This blade features 80 teeth which are 10 inches in diameter. The teeth are arranged in High ATB formation, which results in clean, accurate cuts without a lot of debris. The blade is made of high-density carbide, making it strong enough to cut even through the thickest of materials, and durable, outliving many other blade varieties.

The Freud 80T also features Freud's signature Perma-SHIELD coating. The coating reduces friction between the blade and the material, reducing drag. This protects the blade from being negatively affected by corrosion, which leads to wear out and necessitate the replacement of the blade. The Freud 80T will, therefore, delivery high-quality, accurate, and clean cuts for a long time.

The blade also features laser-cut slots that absorb vibration and noise generated during operation. The vibrations are almost completely absorbed, resulting in completely clean cuts, eliminating the need for a stabilizer when cutting. This feature makes the Freud 80T the perfect blade for making completion cuts.

What we liked

  • Made of high-density carbide for durability.
  • High ATB formation results in clean accurate cuts.
  • Features Perma-SHIELD coating to reduce friction and protects the blade.
  • Laser-cut vents to absorb vibrations to improve cleanness of cuts.
  • It has a 2-degree hook angle suitable for slower feed rates.

What we didn't like

  • It may be slow for ripping cuts due to the low angle.
  • The blade produces a lot of dust when cutting through certain materials.

Buyer’s Guide

If you are buying a table saw blade for the first time, you might find this buying guide important. It highlights important considerations that you should check before you make your final purchase. They include the following:

Tooth Configuration

The type of table saw the shape of its teeth determines blade. There are four main types of saw blades. There are flat top grind (FTG) blades whose teeth have square top edges. These types of blades are suitable for cutting and are good for ripping through material. However, they do not produce a clean cut. There are also alternate top bevel (ATB) blades which are angled at the top, with each tooth angled in a different direction from the previous one. ATG blades are good for slicing through the material and produce clean cuts. Teeth which have steeper angles produce cleaner cuts.

Another type of saw blade is the triple-chip grind (TCG) blade. The teeth alternate between an FTG tooth and a chamfered tooth. The chamfered tooth makes a rough cut, and the FTG tooth cleans up the cut. TCG blades are suitable for use on thick materials without blunting.

The fourth type of blade is the combination (ATBR) blade. These are blades arranged in sets of five, with 4 ATB teeth with one FTG tooth. The ATB teeth make crosscuts, and the FTG tooth rips through the material.

Another common configuration is the high alternate top bevel (Hi-ATB) configuration. These kinds of blades are suitable for very fine crosscutting and for cutting through materials which are prone to chipping with care.

Hook Angle

The kind of hook angle on a blade determines the aggressiveness of the cut. It also determines the rate at which the user feeds material to the saw during operation. A high or positive hook angle will give an aggressive cut and works at a fast feed rate. This makes it suitable for ripping jobs. Blades with low or negative hook angles have a less aggressive cut and slower feed rates.

Type of Job

Different types of jobs call for different types of blades. When ripping, you are looking to break a large board into different parts of various sizes. In this case, you will need to use an all-purpose blade or a combination blade with 40 or more teeth.

These blades will give you a fast, clean cut which will not need a lot of sanding afterward. A 24-tooth blade will also do the job, but it will not need a smooth cut, and you will need to cut off chips and pieces afterwards to resize the pieces into the desired dimensions.

When crosscutting, you want to pick a blade with more teeth as they minimize tear-out on the exit end of the piece of wood. For this purpose, you want to choose a blade with 60 or more teeth. ATB blades are also suitable for this kind of job since they give smoother and straighter cuts. A 40-tooth or 50-tooth combination blade will also do a good job of crosscutting although it will not make as clean a cut as blades with more teeth.

YouTube Video Credit 3x3Custom - Tamar

Type of Material

Sheet materials have their own special needs and require a specific type of blade for each. Sheet materials include particle boards, plywood, MDF, and plastic laminate. Plywood experiences tear-out during exit and thus requires fine cutting action with minimal revisions.

For this, you want to use an ATB blade or an all-purpose blade with a lot of teeth. Denser materials like particleboard and MDF need blades with sharp edges so that they do not wear out. An ATB blade will provide clean cuts. A TCG blade works best for these kinds of materials because they remain sharp over a lot of uses.

For solid wood materials, a 40-tooth ATB blade or 50-tooth ATBR blade does the best job. They make slower cuts, but the cuts are clean, requiring little clean-up. 24-tooth FTG blades can also do the job, but the result may be coarse and require clean-up after cutting to get the desired shape.

Gullet

The gullet refers to the space between the teeth on a saw blade. These spaces collect the chips generated during sawing and vary in size depending on the type of blade. A deeper gullet collects more material. During a ripping job, the material is cut through at a fast rate.

Therefore, a lot of chips are collected, and so a deep gullet is required. When handling a crosscutting job, smaller chips are collected at a slower rate, and thus the gullet is shallower. This prevents a fast feed rate when crosscutting.

Kerf

A blade's kerf refers to the width of cut a blade makes in the material. There are two main types of blade kerfs: full-kerf and thin-kerf. Full-kerf blades cut an eighth of an inch thick in the material and require a lot of power for this. They thus need saws with a motor that is more than 3 horsepower. Thin-kerf blades cut less than an eighth in the thickness of the material and thus needs less motor power.

Your powering capabilities should determine your choice of the type of kerf for your blade. Thin-kerf blades are suitable for home sawing needs and for smaller jobs in industrial sites. In the past, thin-kerf blades used to experience a lot of vibration due to the thinner blade plate, producing cuts that are not clean.

Technological advances have reduced the vibration in thin-kerf blades, making them suitable for bigger jobs like industrial-level full-kerf blades. If your saw is low-powered, then you want to pick a thin-kerf blade since it will do a great job at low power levels.

Frequently Asked Questions

Question: What are the best saw blades?

Answer: A lot of factors go into determining the best saw blade. You need to consider the material you are cutting through, the amount of power, and the job you want to do. The saw blades reviewed in this article are among the best, and you should consider them if you want to make a purchase.

Question: Can a miter saw blade be used on a table saw?

Answer: Yes, it can be. However, there are several factors you need to consider, including the hook angle, the number of teeth, and the kerf width. Miter saw blades have high tooth count, lower hook angles and full-kerfs. You should consider this, and ask for help from the blade's manufacturer before you make the switch.

Question: What is kerf on a saw blade?

Answer: It refers to the gap left on the material after the blade cuts. The type of kerf determines the kind of power required for your saw's motor. Thin-kerf blades require less power compared to full-kerf blades.

Question: Can you rip with a crosscut blade?

Answer: Yes, it is possible to rip using a crosscut blade. The tooth combination determines how suitable a crosscut blade will be at ripping, considering that ripping requires a lot of teeth for cleaner cuts and a deep gullet for debris collection. The best choice would be to use a combination blade as it has good features for both uses.

Question: Can I use a smaller blade on my table saw?

Answer: Yes, you can. Table saws are designed to use 10-inch blades. However, blade varieties are many, and there are several smaller options out there that do a good job. You can use a smaller blade than your table saw is made for, but this is not something that is recommended due to the dangers involved. Never use a larger blade than what your table saw is designed for.

Final Verdict

Table saws are handy pieces of equipment that are suitable for a range of uses; whether small jobs within the house or bigger jobs on different construction sites. This does not mean it is easy to choose a table saw blade since there are many options out in the market. There are many factors to consider, and they have been discussed extensively in this article.

Factors like the type of job you want to do, the type of material you are going to be working on, hook angle, kerf width, and gullet depth are all important considerations before you make your purchase. This article has aimed to simplify the decision for you. It has also reviewed the best table saw blades available out there that will cater to any of your cutting needs. This way, you will be well-equipped to handle any job that comes your way efficiently without breaking the bank.

Relevant Resources

Alvin V.Stone
 

Web Analytics