Best Sliding Compound Miter Saw – Guide & Reviews

For woodcutting projects, you need a sliding and a compound miter saw. Here’s how you find the best sliding compound miter saw for your budget. With a compound miter saw, you can enhance your ability to make a wider variety of cuts on your work pieces. But to really maximize your woodworking capabilities, you need the best one you can find.

A compound miter saw lets you cut at many different angles. But it also lets you cut a bevel because it tilts in one direction (usually to the left). That means it’s much easier for you now to cut at two different angles, which makes installing crown molding and other projects so much easier.

But you can really boost the productivity and versatility of the miter saw if it has a sliding feature that lets the saw slide back and forth. This enables you to cut even wider pieces of wood.

Top 5 Sliding Compound Miter Saws Comparison

Image Product ​Name

Weight

Warranty

​Motor

Price
Hitachi C10FCE2 15-amp 10 inch​​​

​26.3 Pounds

​1 Year

​15 amp

​​Dewalt DWS709 Slide 12-Inch​​​​​​

51 Pounds

3 Year

​​15 amp

Wen 70716 Slide 10-Inch​​

30 Pounds

2 year

​​​15 amp

Dewalt DWS780 Double Bevel 12-Inch 

56 Pounds

3 Year

​​15 amp

​​Dewalt DW715 15-amp 12-Inch​​​

​42 Pounds

3 Year

​​15 amp

Best Sliding Compound Miter Saw Reviews

1. Hitachi C10FCE2 15-Amp 10-inch Single Bevel Sliding Compound Miter saw

Hitachi C10FCE2 15-Amp 10-inch Single Bevel

More photo & price onamazon.com

This is a very affordable 10-inch miter saw, but the low price isn’t the only reason why the Hitachi C10FCE2 is a perennial bestseller. Another reason is that unlike other miter saws, this one is extremely portable too. While other models can weigh up to 76 pounds, this one weighs just 26.3 pounds. You’ll have a very difficult time finding another 10-inch miter saw this light.

Still, perhaps the real reason is that the overall quality of the Hitachi C10FCE2 is excellent. The 15-amp motor is quite formidable, and it can deliver up to 5,000 rpm to the blade. That makes short work of any woodcutting job.

You can control all that power easily enough, though. You have an elastomer grip on the horizontal handle, which deadens the vibrations coming through the handle to your hand. You can also secure your work pieces firmly with the fine clamping system built in.

You can make adjustments with only your thumb, so you can set the miter adjustments up to 52 degrees. This design allows you to change the cutting angle of the blade very easily, so you can create miters in your crown molding and other trim pieces.

The bevel adjustment can reach up to 45 degrees to the left. That gives you beautiful bevel cuts in just one attempt. You can raise the flip fence up to 4 inches, so you can work on pieces measuring 5 and 21/32 inches deep, and 2 and 5/16 inches high.

To maximize the durability of the miter saw and protect the interior parts from dust, the Hitachi C10FCE2 uses a highly effective dust collector system. The durability of this brand  is very well-known, and its ​1-year warranty is tough to beat.

2. DEWALT DWS709 Slide Compound Miter Saw

DEWALT DWS709 Slide Compound Miter Saw

More photo & price on amazon.com

The Dewalt brand is famed in the industry for its high quality and dependable durability. That’s why it’s always been a popular choice among woodcutting aficionados, who don’t mind paying a little bit more to get a lot more in terms of capabilities.

Its 12-inch blade is powered by a 15-amp motor delivering a speed of up to 3,800 rpm. Making repetitive cuts accurately is quite easy, since you can just quickly adjust the miter angle to one of the 13 different miter detents. The miter angles can reach up to 50 degrees to the left and 60 degrees to the right. It’s very easy to set to the miter angle setting you want, as the miter scales are easy to read and the red miter pointer is huge.

The same goes for the bevel scales. The accuracy is also enhanced by the use of the dual horizontal steel rails with linear ball bearings. With the sliding fences, you can work on 4.5-inch base molding and 5.5-inch crown molding. When you need to switch to bevel cuts, these slide fences can just slide out of the way. You can also cut through 2 by 10-inch lumber easily at 45 degrees. At 90 degrees, you can also deal with 2 by 14-inch lumber pieces.

The DWS709 is extremely strong and rigid, as it features a heavy-duty aluminum base. You even have pads on the stainless steel plates to minimize the effects of wear and tear. Add the 3-year limited warranty, and you can see just how durable this miter saw is.

3. WEN 70716 10-Inch Sliding Compound Miter Saw

WEN 70716 10-Inch Sliding Compound Miter Saw

More photo & price on amazon.com

The WEN 70716 is clear evidence that you don’t absolutely need to spend too much money on ​a miter saw. This is ideal for those on a limited budget, because you do get a lot of value for your money.It comes with a dependable 15-amp motor that can deliver up to 5,500 rpm of power. That’s enough oomph to let you easily cut through boards up to 3.25 inches thick.

The sliding feature also allows you to use the 10-inch blade on boards measuring 11.5 inches deep. This compound miter saw lets you miter to the left and right up to 52 degrees, with bevel capabilities to the left up to 45 degrees. For quick angle changes, you can just set it to any of the preset detents, which are set at 0, 15, 22.5, 30, and 45 degrees. To make it safer for you, the blade cover automatically retracts every time you use it.

This comes with a 2-year warranty. It can provide you with a long time of service as long as you keep the sliding stainless bar constantly lubricated. The WEN 70716 is a perfect example of how an affordable price tag doesn’t necessarily mean you’re getting cheap quality.

4. DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw

More photo & price onamazon.com

If you’re antsy to get the very best, then this is the one you get for your workshop. The price may be a bit on the high side, but then again the Dewalt brand offers premium quality and features. The miter angle on the DWS780 reaches up to 50 degrees to the right and 60 degrees to the left.

The miter detent plate makes it easy for you to set the right setting, since you get 10 different preset stops to choose from. There’s a miter override in case you want to use another angle that’s not preset. With your bevel cuts, you can go up to 49 degrees on both the left and right. The stops on each side are set at 0, 22.5, 33.9, 45, and 49 degrees. You can make 45-degree crosscuts on lumber measuring 2 by 12 inches. At 90 degrees, your cuts can go through 2 by 16-inch lumber.

You can cut horizontally up to 13⅞ inches, with a nested crown capacity of 7.5 inches and a vertical capacity of 6.75 inches. You also get a bright LED light for even greater accuracy, as this will show you just where the blade will go on the wood.

The alignment system is terrific, as there’s no need for recalibration even after a blade change. The power cord placement is very convenient, and the dust collector system is very effective. The durability is also exceptional, and the warrant is terrific. You get a limited warranty for 3 years, and a whole year of free service.

5. DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw

DEWALT DW715 15-Amp 12-Inch Single-Bevel Saw

More photo & price on amazon.com

The DW715 has been in the miter saw market for almost a decade now, and yet lots of people still buy it. It’s probably because now people know that this sliding compound miter saw is really durable as well as useful. The 15-amp motor can last for a very long time, and delivers up to 4,000 rpm of power to the 12-inch blade.

You can get extremely accurate cuts with this miter saw, and you won’t have to exert a lot of effort. You can set the miter detent to any of the 11 positive stops, and the range reaches up to 50 degrees to both the left and right. If none of these positive stops work for you, you can always use the detent override to get the angle you want.

The DW715 has a tall fence that allows you to work on base molding that measures 6.5 inches, and on crown molding that measures 5.25 inches. You can just set the fence out of the way when it’s time for you to make your bevel cuts.

With this miter saw, you can cut through lumber measuring 2 by 8 inches at 45 degrees. You have a range of 48 degrees to the left for your bevel cuts, and another 3 degrees to the right. You’re able to get accurate bevel cuts very quickly, and even big jobs don’t seem as big with this miter saw. Don’t worry about the durability, too. The limited warranty is for 3 years, while you also enjoy free service for an entire year.

What is a Sliding Compound Miter Saw

Miter saws are popular today as handy tools suitable for diverse novice woodworking projects. They are outstanding for precise angled cuts to desired specifications.  If you ever want to make cuts, be it crown molding, window casing, picture frames or any other cut, a miter saw will live up to the task.

Notably, miter saws come in many designs with remarkable innovative features on its designs; the standard, sliding and compound models.  A sliding compound miter saw brings all the versatility of compound miters saws and sliding designs into a perfect one.

Unlike the other types of saws, sliding compound miter saw boast, uniquely, the capability to allow for increased or wider length of cuts for all your projects. This implies, with its radial sliding arm, sliding saws can move the saw forwards and backward seamlessly, lengthening the board size you may want to cut.

Therefore, as much you have to pay a little extra for its impressive functionality, you will love the saw’s versatility for your projects. But, what makes sliding compound miters stand out?

​​Tutorial on various function of Sliding Compound Miter Saw (Video)

Best functionality for a sliding compound miter saw

Outsmarting its peers in delivering a creative cutting edge, sliding compound miters are helpful in crosscutting wide pieces of material, about 90-degrees, for all the wider stock dedicated assignments.

Therefore, as a professional in need of a powerful tool, a sliding compound miter will be worth your investment, thanks to their durable and sturdy designs.

Compound Miter Saw vs Sliding Compound Miter Saw

Do you find it a bit confusing on what are the exact distinctive features between a compound saw and a sliding model? Well, the good news is that both designs are available as either single bevels, able to cut in one direction or as dual bevels, able to tilt left or right. Compound miter saws tend to strike a balance effortlessly as both miters and bevels. Moreover, they have the capability to cut wider boards.

For instance, if you need to cut fencing posts, this is a job that will require large-sized blades with a huge width of cutting. Hence, a sliding compound miter will be a great choice for the best results. On the other hand, compound miter Saws come with the capability to cut well angles than a simple miter. Additionally, its pivoting arm is able to tilt the head to the side for a ‘bevel’ cut.

I love the fact, compound miter saws boast impressive cutting arc unlike sliding compound saws. This is because you will not experience any hindrances from the sliding rails. Besides, you don’t have to worry about corner joint moldings at any time.

Nevertheless, the width of the material to cut is quite limited but it is reliably an outstanding tool for most your tasks within its range. Do you love simple tools to operate? If you are a newbie to woodworking, the compound miter saw is easy to engage.

All the same, find sliding compound saws your best friend when it comes to cutting thick materials like logs, lumber, boards and much more, courtesy of their dependable alignment when it comes to the much-needed beveling.

Final Verdict

Any of these sliding compound miter saws will do wonders for any woodcutting DIY enthusiast. They’re all high quality, easy to use, and can make woodcutting jobs so much faster and more accurate. Find any model here that fits your needs and your budget, and you’ll find that you can do more woodcutting jobs more easily with the best sliding compound miter saw in your workshop.Happy woodcutting !!

Relevant Resources

Hi there, technology lovers and DIY enthusiasts! My name is Alvin, and I am an admin for this blog. I am a techno-geek and a DIY enthusiast, making this blog the right place to share all my knowledge with you to make your life easier in terms of technology.

Leave a Comment