Best Sliding Miter Saws reviews | Ultimate Buying Guide for 2019
Table of Contents
- Best Sliding Miter Saws Comparison
- Best Sliding Miter Saw Reviews
- WEN 70716 Sliding Compound Miter Saw
- DEWALT DWS709 Slide Compound Miter Saw
- DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw
- Makita LS1018 Dual-Bevel Slide Compound Miter Saw
- Bosch 5312 Dual Bevel Slide Compound Miter Saw,12-Inch
- Evolution Power Tools RAGE3 10-Inch Multipurpose Sliding Saw
- Hitachi C12RSH2 Dual Bevel Sliding Compound Miter Saw
- DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter Saw
- DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw
- How to Choose the Best Sliding Miter Saws
- Woodworking Tips and Tricks
Looking to improve your woodcutting capabilities in 2019? You need the best sliding miter saw in your workshop, and here's the guide on best sliding miter saws reviews. It doesn’t matter if you’re a professional woodworker or a DIY enthusiast. In all likelihood, you’re going to need a good miter saw in your workshop to get the best results for your efforts.
With this tool, you can work on window casings, door frames, crown molding, and picture frames. Your best bet is to get a sliding miter saw so you can cut wider pieces of wood. But how do you determine which one is the best for you?
Before making any buying decision we highly recommend you to read the buying guide at the end of this article.
Best Sliding Miter Saws Comparison
Best Sliding Miter Saw Reviews
WEN 70716 Sliding Compound Miter Saw
Wen 70716 is one of the more affordable miter saws on this list, but it does offer a lot. This uses a 15-amp motor with 5500 rpm, so you can easily cut up wooden boards up to 3.25 inches thick. As it’s a sliding miter saw, it can accommodate boards up to 11.5 inches deep.
The 10-inch blade features 60 teeth tipped with carbide, while it also comes with a dust collection bag that collects your saw dust to make it easier for you to clean up after your work.
Because of the low price of the miter saw, you should have enough money left with you so you can buy a higher quality blade if you want.
With this compound miter saw, you can bevel up to 45 degrees to the left, while you can miter to the left and right up to 52 degrees. The preset detents are at 0, 15, 22.5, 30, and 45 degrees. The automatic blade cover retracts when you use it, which should reduce the risk of accidents and enhance your safety.
Wen 70716 is quite a dependable miter saw. Just make sure that you keep the sliding stainless bar well lubricated. It comes with a decent time limited warranty, and the customer helpline can give you the friendly assistance you need if you have any issues with the WEN miter saw.
All in all, Wen 70716 offers a great bang for the buck. At this price range, it can be very difficult finding a miter saw with greater capabilities and features.
Highlighted Features of WEN 70716
- Comes with a dust collecting bag.
- Boasts 15-amp motor with 5500 rpm.
- Accommodates boards of up to 11.5 inches deep.
- Bevels up to 45 degrees left and 52 degrees right.
- Affordable, user-friendly and safe.
- You can easily take this to a job site.
- It’s very useful and versatile.
- It’s one of the best miter saws in its price range.
DEWALT DWS709 Slide Compound Miter Saw
This is a Dewalt, and that means you’re getting a miter saw brand that’s known for top quality and durability. That also means you’re going to have to pay more for this, but then again at least you’re getting dependable quality for your woodcutting projects.
Dewalt DWS709 miter saw comes with a 15-amp motor that delivers up to 3,800 rpm for the 12-inch blade.
The sliding fences let you work with 5.5-inch crown molding, along with 4.5-inch base molding. These sliding fences slide out of the way easily when it’s time for bevel cuts.
The unique back fence design lets you cut 2 by 14-inch lumber at 90 degrees. At 45 degrees, you can deal with lumber measuring 2 by 10 inches. The Slide Compound miter saw tilts 60 degrees to the right and 50 degrees to the left. You actually have 13 distinct miter detents for quick adjustments.
That’s very convenient in providing accurate repetitive cuts. To help with the accuracy, you also have dual horizontal steel rails with linear ball bearings. In addition, you have a huge red miter pointer that’s easy to read and easy to place on the right miter angles.
The bevel scales are also very large and easy to read. Dewalt DWS709 comes with a heavy-duty aluminum base with tall ribbing, so it’s very rigid and strong. The stainless steel plates are even equipped with pads so that the wear and tear on the saw is reduced considerably. It also comes with a decent time limited warranty.
Highlighted Features of DEWALT DWS709
- This is a dual bevel model so you can tilt the saw to the left or right.
- It’s actually light for a saw of this caliber.
- It’s easy to set the bevel and miter angles.
- The sliding feature lets you cut through 2 by 4’s easily.
- Precise and accurate.
- Boasts 1 5-amp motor power.
- Provides up to 3800 RPM for the 12-inch blade.
- Able to cut 45 and 90 degrees lumber.
- Can provide suitable repetitive cuts.
- Bevel scales easy to read.
- Portable, sturdy and long lasting.
The DEWALT DWS709 slide compound miter saw is compatible with the following DEWALT products:
DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw
This is the premium 12-inch miter saw from Dewalt, and it’s the most expensive model on our list. But its features are truly formidable.
Its capabilities include offering miter tilts 60 degrees to the left and 50 degrees to the right. It also offers 10 preset stops on the miter detent plate. For bevel cuts, you can go up to 49 degrees on both the left and right sides. You have stops at 0, 22.5, 33.9, 45, and 49 degrees for both left and right.
Dewalt DWS780 can make cross cuts on 2 by 16-inch lumber at 90 degrees, and on 2 by 12-inch lumber at 45 degrees. The vertical capacity is 6.75 inches, with nested crown capacity of 7.5 inches.
This can cut up to 13⅞ inches horizontally.For greater precision, the improved alignment system offers a super-bright LED light so you know precisely where the blade will touch the wood.
This alignment system is very dependable and accurate. You don’t even need to recalibrate it after an extended period of time or after you change the blade on the miter saw.This is very easy to use, as the power cord placement keeps it from messing with the slide.
The dust collection system can also collect up to 75% of the sawdust you produce. There’s a miter detent override to let you choose the angle you want between the detents, while cam lock miter button locks the angle in place. Working with wood becomes a real pleasure, as you can set your angles consistently and hold it in place when you make your cuts.
The durability of Dewalt DWS780 miter saw is outstanding. In addition to the decent time limited warranty, you also get free service for a year. That’s what you get when you buy something actually made in the USA. It’s a premium Dewalt miter saw, and that means it’s very solidly built.
Highlighted Features of DEWALT DWS780
- It comes with industry-leading cut capacities.
- It offers advanced technology for fine and precision cutting.
- It’s portable.
- The warranty is excellent.
- Able to tile 60 degrees to left and 50 degrees to the right.
- Provides 10 preset stops.
- Can handle bevel cuts of up to 49 degrees.
- Boasts top accuracy.
- Collects up to 75 percent of dust produced.
Makita LS1018 Dual-Bevel Slide Compound Miter Saw
Makita LS1018 is a miter saw with a 10-inch blade, and it’s powered by a 13-amp motor. It doesn’t need as much maintenance as a typical 15-amp motor, as there’s no belt that can slip or wear down so you have to replace it. It also has soft start, so starting it up is much smoother.
It sure doesn’t offer less rpm as it delivers 4,300 rpm. So it’s ideal for both general construction and carpentry as well as for fine woodworking. It miters up to 47 degrees to the left and up to 60 degrees to the right. The rear handle bevel lock lets you secure the angle up to 45 degrees left and right.
The maximum cutting depth can handle a 1¼ by 8½-inch lumber at 45 degrees. At 90 degrees, you can cut a piece of lumber measuring 3⅝ by 12 inches. Makita LS1018 features a linear ball bearing system, so it’s designed to offer extremely accurate cuts. The large aluminum base offers a lot of stability, but the weight still allows for some portability.
The rubberized D-handle is ergonomic for better fit and greater comfort, while the electric brake speeds things up while it enhances your safety. With this, miter saw, you only need a single pass to cut through 4 by 4-inch lumber pieces. Cutting crown molding and baseboards become much easier too.
It is Compact Design and Less Weight.
Highlighted Features of Makita LS1018
- Commands a 13-amp motor power.
- Zero machine replacements costs.
- Provides 4300 RPM.
- Miters up to 47 degrees to the left and 60 degrees to the right.
- Has a quality bevel lock.
- It’s a pleasure to use.
- You can bring it easily to jobsites.
- It offers accurate cuts.
Bosch 5312 Dual Bevel Slide Compound Miter Saw,12-Inch
Bosch 5312 is another highly regarded brand in the woodcutting tool niche, which explains the rather pricey cost of the 5312. It’s rather big and very heavy, but it’s still possible to move it around the workshop with two people working together. The job of moving it around is much easier thanks to the superb handle.
Once you pick the right place for the Bosch 5312, you’ll discover just how much capacity it has to cut large wood pieces.
The base is already 25.5 inches long and with the sliding extensions it goes all the way up to 40 inches in length. The speed-track sliding fences measure 4.5 inches tall, so you have enhanced capabilities for cutting crown molding and setting up your bevel cuts is easy.
You have detents at 0, 33.9, and 45 degrees on both the left and right sides. The scales for bevel and miter cuts are very visible and you also have a miter detent override.
The miter angle ranges up to 52 degrees to the left and 60 degrees to the right. The miter detents come in at 0, 15, 22.5, 31.6, and 45 degrees on both sides, plus at 60 degrees additional on the right.
So you can set the detents at 31.6 degrees for miter and 33.9 degrees for bevel and you can make crown molding cuts quickly and accurately.It’s so much easier (and safer too) with the electric brakes, and the Bosch durability is well-known.
The Bosch 5312 comes with a standard decent time warranty.
Highlighted Features of Bosch 5312
- The setup and take down process is simple.
- It’s quick and easy to make cut angle adjustments.
- You get reliable accurate cuts every time.
- The electric brake stops the blade in seconds.
- Excellently cuts large pieces.
- Speed tracking of up to 45 inches tall.
- Easy to set bevel cuts.
- Effortless crown molding.
- Boasts accurate cuts.
Evolution Power Tools RAGE3 10-Inch Multipurpose Sliding Saw
The Evolution brand name for this 10-inch miter saw isn’t quite well-known, so it’s quite affordable. But its features do seem destined to make it more famous and popular in the future. It’s not just for cutting wood—it can deal with plastics, aluminum, and even steel. So when you cut through wood, it won’t really matter if you still have nails embedded in it.
That’s because the RAGE3 uses a high-torque 15-amp motor combined with a soft start and an optimized gearbox.
Working with the superb 28-tooth blade tipped with tungsten and carbide, it can go through 6 mm of mild steel.
There won’t be any heat and any burrs, and the sparks are rare. You end up with a cool finish that you can work on instantly.
The miter system offers 45 degrees to the left and right, with 9 stops. You also get a 45-degree bevel tilt that you can use on just about all the common cuts you will use. The cutting depth can be adjusted, and there’s even a laser guide for faster and more accurate cuts.
With the inline pistol grip handle, you can use this Evolution power tool without much difficulty whether you’re right or left-handed. The dust collection system is excellent, so you really don’t have much cleanup to do afterwards. The outer casing is very tough, which makes it quite durable. It comes with a decent time warranty.
This evolution power tool is the one you get when you’re not dealing exclusively with just wood. If you’re also working a lot on metals, then you get this RAGE3. It’ll cut just about anything you put in front of the blade. Add the terrific dust collection and you really do have a super-versatile sliding miter saw.
Rage 3 sliding miter saw is capable of cutting Steel, Aluminum, Wood (even wood with nails) and Plastic, using just one blade.
Highlighted Features of Evolution Power Tools RAGE3
- The stock blade can cut through aluminum and mild steel.
- It’s a compound miter saw that can give you bevel and miter cuts.
- It comes with a laser guide that helps with accuracy.
- It lasts for a long time.
- The price is very attractive.
- Has a high torque of up to 15-amp motor.
- Tool blade tipped with tungsten and carbide.
- Boasts impressive dust collection.
Hitachi C12RSH2 Dual Bevel Sliding Compound Miter Saw
The Hitachi brand has been around for more than a century, and it’s famous for its electrical appliances. So it’s not surprising that they also compete in the sliding miter saw niche.
This C12RSH2 sliding miter saw offers a compact sliding system that lets the saw head slide along fixed rails, and this design results in the elimination of the rear clearance that other miter saws need. This design cuts 12 inches from the required footprint of the miter saw.
The measurements on the bevel and miter scales are very easy to read, so you can make adjustments without much effort. There’s a laser marker too for greater accuracy in your cuts. For greater control and comfort, the vertical handle is quite soft, and the elastomer grip is very effective in reducing the vibrations you feel.
Hitachi C12RSH2 is quite durable, and it can help you in your woodcutting work for a lot of years. All of its good features make it the ultimate choice for every homeowner and trim carpenter.T he warranty is a very decent amount of time, although you may need to double check this with your seller.
Highlighted Features of Hitachi C12RSH2
- Able to cut 12 inches of required footprint.
- It tilts to the left and right for bevel cuts.
- You can get accurate cuts easily.
- The handle provides you with comfort and control.
- Has an adjustable laser line.
- No rear clearance required when in use.
- Boasts a 15-amp motor power.
- Easy to read measurements.
- Has less vibrations and easy to control.
DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter Saw
Now we’re back to the venerable Dewalt. Dewalt DW717 model is very powerful and comes with lots of features for grater versatility and control. It features a standard 15-amp motor that provides power up to 4,000 rpm for the 10-inch blade. With the back fence design, you can get 45-degree cuts through lumber measuring 2 by 14 inches.
Getting precise cuts with this miter saw is very easy, as you gave up to 11 positive stops in the adjustable stainless steel miter detent plate.
That makes it much more efficient. The miter capacity is also very formidable, as it goes to 52 degrees to the right and 60 degrees to the left.
The cam-lock miter handle is easy to adjust for fast and accurate miter angles. There’s also a nifty detent override so you can get the miter setting you want outside the presets.
For bevel cuts, you get up to 48 degrees to both the left and right. This makes cutting easier and faster, so you can just flip the saw instead of flipping the work piece.
You also have some preset bevel stops you can use – 7 preset stops, in fact, for both left and right. With the advanced clamping mechanism and the use of linear ball bearings, you’ll get accurate cuts for a very long time.The tall fence offers a lot of capabilities.
It can support 6.25 inches of crown molding when it’s nested vertically. You can also deal with 6-inch base molding when you set it against the fence.It’s very easy to use. There’s also not much cleanup needed afterwards, since the dust collection system is very effective.
As for its durability, the Dewalt brand name should allay any concerns. Dewalt DW717 is a very tough miter saw, and it comes with a warranty of decent period of time.
Highlighted Features of DEWALT DW717
- Versatile .
- 15-amp motor power.
- 4000 RPM for 10 inch blade.
- Provides up to 11 positive stops.
- Comes with cam-lock miter handle.
- The cuts are dependably accurate.
- It’s reasonably portable.
- It’s very easy to use.
DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw
Finally we also have the highly regarded Dewalt DW715 miter saw from Dewalt. It’s been available since 2007, and even now it still competes as one of the best in the miter saw niche.
First of all, it’s still quite powerful. The 15-amp motor it uses offers enough power for 4,000 rpm for the 12-inch blade, and the motor has a terrific reputation for durability. With this miter saw, you can get very accurate cuts very quickly. The miter capacity is pretty wide, with up to 50 degrees to the left and right.
It’s very easy to set up the miter system, as you have 11 positive stops to choose from. The cam-lock miter handle isn’t difficult to adjust at all, and you also get a detent override for more unconventional angles. With the tall fence on the sliding miter saw, you can work on 5.25-inch crown molding and 6.5-inch base molding.
When you switch to bevel cuts, the fence easily slides out of the way.It’s also designed to provide you with very quick and accurate bevel cuts.
Your bevel cuts can measure up to 48 degrees to the left, with up to 3 degrees to the right. That makes this miter saw useful even for big jobs. It can cut through 2 by 8-inch lumber at 45 degrees.
Dewalt DW715 comes with a decent period of time as warranty, along with a free service contract for an entire year.
Highlighted Features of DEWALT DW715
- Comes with 15 amp motor power .
- Boasts 400 RPM for 12 inch blader.
- It’s very easy to get accurate cuts.
- Has 11 positive stops to pick from.
- You can easily bring this with you to work.
- Easy to adjust.
How to Choose the Best Sliding Miter Saws
Let’s take a look at some of the factors you have to consider before you make your purchase:
The cost of a sliding miter saw can vary widely, but we did make sure that we picked the more affordable ones that offered a nice value for money. With the more affordable units, you can have enough money left to upgrade the blade that comes with the miter saw.
You don’t want something underpowered when you’re making your cuts on wood. Here you have to check the amp level and the rpm. Here you also need to check the size of the blade. We picked the ones with at least 10-inch blades, since 8-inch blades are somewhat limited for many wood workers.
This covers a wide range of features that makes the work so much easier for you. These features include the ability to tilt left and right, fitting in large boards, the number of preset detents, and dealing with the dust properly.
Some of the features you may also want to check out will be about how accurate your repetitive cuts will be with a particular miter saw. These include having a miter detent override, powerful brakes for the blade, and visible scales.
How long will this miter saw last? Some miter saws have been selling for a long time, and have earned a good reputation for durability. For the newer models, you may want to check the length of the warranty as an indicator of how long you can expect it to last. Of course, when it comes to durability the brand name and reputation also matters.
Woodworking Tips and Tricks
Video Credit- WoodWorkWeb
If you’re working with wood at home, then there’s no debate that you need a good miter saw for your project. In fact, it’s in your best interest to get a sliding miter saw despite the added cost. That’s because the addition of the sliding arm on the miter saw opens up a wider range of possibilities for your wood projects.
The sliding arm moves forward and back, so the blade can move to fit in woodwork pieces in greater widths. You’re no longer limited to just cutting dado. With the sliding arm, you can crosscut wider wood pieces, and working on crown molding is so much easier than ever
So get the best sliding miter saw you can afford and add it to your workshop. If you’re a serious wood worker, you won’t be sorry with the additional capabilities you will receive for your money. A good miter saw makes woodcutting easier, and the best ones make the entire woodworking project a genuine pleasure.