Best Plastic To Plastic Epoxy – Ultimate Buying Guide [2022]

Last Update:

You may find a wide variety of glue and adhesive alternatives on the market nowadays. Among these are adhesives for use in DIY and craft projects and industrial-strength adhesives for use in manufacturing. If you are a crafter or a hobbyist, you will utilize glue for various crafts and uses. Additionally, it is usable for various other applications, such as plastic modeling. When deciding on the best plastic to plastic epoxy to use, it is critical to evaluate the application for which the glue will be used.

There are many types of glues suited for use on different types of plastic - each has its specific formulation. Some are quite adaptable, while others are only suitable for a small number of tasks or applications. Check out some of the top plastic epoxy options available below, as well as some characteristics to look for when purchasing this sort of material.

Best Plastic To Plastic Epoxy
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Best Plastic To Plastic Epoxy

The Plastic To Plastic Epoxy was discovered after scanning through many customer reviews that were available online. Hopefully, the recommendations provided by our specialists in this post will assist you in making the best decision.

NoProductScoreAction
1Loctite 681925 Super Glue Plastics Bonding System9.8View On Amazon
2Loctite 1363118-8 Epoxy Plastic Bonder9.8View On Amazon
3J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml9.6View On Amazon
4J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz9.6View On Amazon
5J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz9.4View On Amazon
6Gorilla 2 Part Epoxy8.6View On Amazon
7Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)8.4View On Amazon
8Epoxy Putty Stick, Yanyi Repair Epoxy Glue Metal8.4View On Amazon
9J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Tan - 25 ml8.4View On Amazon
10Deep Pour Epoxy Resin Kit Crystal Clear Liquid Glass - 2 to 4 Inches Plus Food Grade Safe Clear Epoxy Resin8.4View On Amazon

1. Loctite 681925 Super Glue Plastics Bonding System

  • Repairs any plastic guaranteed
  • Quick, neat and easy
  • No mixing required
  • 2 grams
  • Carded
  • Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings.
  • Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas, polycarbonate, polystyrene and PVC.
  • Sets in seconds and dries transparent
  • Easy to apply – no mixing
  • 2-gram tube of bonder with 4mL activator
  • When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 minutes.
  • Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids.
  • It has high impact resistance and can be sanded and drilled.
  • Recommended for bonding substrates such as PVC, polycarbonate, acrylic, ABS, FRP, Nylon, Mylar, Delrin, phenolic, aluminum and stainless steel.

2. Loctite 1363118-8 Epoxy Plastic Bonder

  • Hight Strength Formula: Specially designed acrylic formula bonds, fuses, and repairs a wide variety of plastic surfaces.
  • Double Syringe Design: Conveniently dispenses formula in equal parts to produce a tough, rigid, high-strength bond.
  • Fast & Easy: High-speed bonder sets in just 20-25 minutes for quick repairs
  • Resilient Formula: Resistant to humidity and water, most common solvents, and shop fluids, unique formula does not shrink and has high impact resistance and can be sanded and drilled.
  • Versatile: Ideal for larger household repairs on plastic surfaces, including PVC, polycarbonate, acrylic, ABS, FRP, nylon, Mylar, Delrin, and phenolic, as well as aluminum and stainless steel.

3. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml

  • J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black.
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

4. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz

  • J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces.
  • CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI.
  • APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
  • Bonds instantly
  • Superior strength
  • Will not shrink or pull away
  • Rebuild automotive trim, fiberglass parts and vinyl siding

5. J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy – 2 oz

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius).
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • Will set in 4-6 hours, and cure in 16-24 hours
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Tensile strength is 3,960 PSI

6. Gorilla 2 Part Epoxy

  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries clear; Ideal for clean, easy finishing
  • 5 minute set; Plenty of repositioning time for the perfect fit
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses.

7. Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)

  • Easy-to-use self-mixing dispenser and precision applicator
  • High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
  • Waterproof, sand able and paintable
  • It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
  • Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
  • The static mix nozzle delivers a uniform mixture of resin and hardener every time.
  • It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
  • Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

8. Epoxy Putty Stick

  • Used to repair pipes, water tanks, fuel tank leaks, industrial maintenance, tool crack repair, flooring, door seams, auto parts, swimming pool ceramic decoration, etc.
  • Suitable for a variety of materials, including metal, wood, glass, ceramic, fiberglass, stone, marble and many hard plastics, temperature: -50 degrees to 120 degrees.
  • Easy to use: 6 * 5g individually packaged, no need to cut, evenly according to the amount, fill the repair area, can be polished, painted, colored after curing.
  • 0-10 minutes: Mixing time, finish kneading and use.
  • High-quality materials: Good insulation after curing, do not soften when exposed to water, no food contact.

9. J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe – Tan – 25 ml

  • J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure.
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

10. Deep Pour Epoxy Resin Kit Crystal Clear Liquid Glass – 2 to 4 Inches Plus Food Grade Safe Clear Epoxy Resin

  • Our LIQUID GLASS Epoxy Resin Kit is Expertly FormulatedSelf Leveling Epoxy by Our Chemists! Perfect For Mica Powder, Deep Resin Molds, Alcohol Ink, River Tables, Pigment Powder and Resin Dye!.
  • HIGHEST EPOXY RESIN UV PROTECTION! Our SuperClear Liquid Glass 2” Thick Pour Has The Highest UV Yellowing Resistance Out Of All Competitor’s! HIGHEST PERFORMANCE LEVEL! SuperClear 2.
  • EXCELLENT FOR Colored Epoxy Resin Wood Filler Applications, Or As A Clear Epoxy Resin Wood Filler & Filling Large Voids In Wood With Epoxy POURING UP TO 2” PLUS!.
  • WORKS AMAZINGLY With Metallic Epoxy Pigment! Mixes Flawlessly With Epoxy Resin Color Pigments, Mica Powders Like Black Diamond Pigments & Creates A Superb Colored Epoxy For Wood!.
  • We Are the Original Manufacturer, and We’ve Been in this Business for over 60 years! SUPERCLEAR 2.

Frequently Asked Questions

How Long Does Two-Part Epoxy Adhesive Dry?

Several variables can influence this, including the product you're using as well as the area you're in. Always check the label to be sure. It should take approximately 24 hours to cure and harden completely in most cases.

What is the proper way to mix a plastic epoxy adhesive?

The proportions of epoxy adhesives must be exact; however, many products are available in pre-measured syringes that can be used directly to apply the adhesive. Another option is the two-part putty or pastes in which some epoxy adhesives are packaged, which must first be kneaded together before being used.

Is Epoxy a Good Option for Plastics Repair?

epoxy is indeed an excellent choice when it comes to working with plastics since it creates a strong adhesive bond. The plastic is strengthened at the structural level by these additives, providing chemical resistance and a certain degree of flexibility. However, not all items are created equal, and you will need to conduct research to choose the most appropriate product for your project.

Is it possible to obtain a Waterproof Epoxy for Plastic?

Yes, epoxy adhesives have a variety of advantages, including heat resistance, chemical resistance, and water resistance, to name a few. Excellent for use on those pesky plastic plumbing issues.

How Much Epoxy Adhesive Do You Need to Purchase?

Depending on whether you require glue for a small or a large area, you should select the appropriate size. Several adhesives are available in single-use containers, ideal for little jobs. You will need a larger sum of money to complete greater projects, so calculate your needs carefully before purchasing.

Is it possible to increase the amount of hardener used to increase durability?

No, while creating a two-part epoxy adhesive, it is necessary to adhere to exacting measurement standards. When mixing epoxy, you should always use one part resin to one part hardener. If you change the mixing ratio, the results will not anticipate.

How To Choose The Best Plastic To Plastic Epoxy

The use of epoxy adhesives for bonding plastic is a fantastic solution for various reasons. The fact that they are simple to use and apply does not detract from the fact that they form extremely strong bonds, with some epoxies having tensile strengths over 5,000 pounds per square inch.

Additionally, epoxies tend to form both flexible and weather-resistant bonds, making them an excellent seam-sealing solution for many applications.

Furthermore, epoxies are extremely inexpensive products. However, not every epoxy will be appropriate for your specific requirements.

When comparing different epoxies for plastic, it is important to consider the following factors. You will be able to find the best product based on these considerations.

Toughness in a tensile test

The tensile strength refers to how strong the bond is after forming. Naturally, the tensile strength of your ideal product should be higher, as this will ensure that your bonds are firm and long-lasting. The tensile strength is typically expressed in pounds per square inch (PSI).

In general, only epoxy products with the clearly stated tensile strength of their adhesive bonds should be considered, as they leave no room for interpretation.

Resilience

Plastic fittings require a certain amount of flexibility between joints to be long-lasting. When the plastic components shake or bend, a firm or stiff connection is quickly broken. Even though they establish strong bindings, the best epoxies for plastics are intended to allow their bonds to maintain a modest degree of flexibility, allowing them to absorb shock and vibration more effectively.

Dimensions of the container

When it comes to epoxy materials that are only intended for one-time use, the size of the container is extremely crucial. The purchase of a large quantity of one-time-use epoxy for a small area would be counterproductive because the remaining product would be wasted if you needed to repair a little section.

On the other hand, if you run out of glue in the middle of a project, you could end up with a subpar finish. For this reason, before you go out and buy adhesive, get a rough estimate of how much you'll need to finish out your job.

Brand

You can't go wrong with a recognized brand name, even if there are many excellent, lesser-known products available. The brands J-B Weld, Gorilla Glue, and Loctite have a reputation for producing high-quality epoxy.

Price

These products might have a wide range of prices depending on their characteristics. Stronger glues are typically more expensive than weaker glues. However, not all of your requirements will need epoxy of industrial strength.

The Last Words

The fact that there are so many good glues available does not mean that all of them are acceptable for use with plastic. Consequently, using an adhesive that has been specifically designed for the goal of creating strong, safe, and long-lasting bindings between your plastic products is recommended.

Polyurethane epoxy adhesives are among the most effective adhesives for use with plastics. This is because they improve the structural integrity of the plastic while allowing for a reasonable degree of flexibility inside the bond.

Finally, we've arrived at the end of a long and winding road trip. However, we have confidence that you will be able to function independently from this point on! Choosing the best plastic to plastic epoxy, after all, shouldn't be difficult.

I’m a DIY enthusiast and run a woodshop. I created this blog to provide you with reliable information concerning power saws so that you can do your work best. Not only do I provide power saw guide and reviews but also other resources that help you take your projects to a higher level.

Leave a Comment