The Best Sliding Miter Saw Stand in 2017 – Guide & Reviews

Are you looking for the best miter saw stand for your workshop? You can start by looking over these top 5 choices. It’s great to use a sliding miter saw, since the extensions allow you to work on even larger pieces.

But the problem with lots of excellent sliding miter saws is that often they’re not being used with the right miter stands.

Only with the best miter saw stand will you really get the full range of benefits from your ideal sliding miter saw.

The best miter saw stand must match all your needs. It’s true that you can make your own makeshift stand, but a professionally-made stand is so much better. You’ll get more accurate cuts at the very least.

You can also buy a miter saw stand that’s specifically designed for the particular miter saw model you’re using, but then if you switch to another model that miter saw stand becomes worthless.

So you need a miter saw stand that can work with many different types of models. You also need something strong, and it should be light too if you need to bring it to job sites. Here are some miter saw stands with features that may match your requirements:

Recommended Best Sliding Miter Saw Stands

DEWALT DWX726 Rolling Miter Saw Stand

Editor Rating:

Are you looking for something portable? Then this Dewalt DWX726 may be the miter saw stand you’re looking for.

It comes with mounting rails that you can easily adjust, so it can adapt to almost all miter saws out there.

If you’re bringing this along to a jobsite, you’re in luck. That’s because it only weighs 67 pounds, and that’s not a problem for 2 people to lift it to your vehicle.

It doesn’t take up a lot of space in your vehicle either. When it’s folded, it’s only 59.5 inches wide and 17 inches high.

Once your vehicle is at the jobsite, you won’t have to carry the stand all the way to the spot where you want to put it. That’s because it is rolling Miter Saw Stand and it uses wide rubber wheels on one end.

So you can just maneuver it to place like a high tech wheelbarrow. When you’re at the right spot, just make sure the stand fits in the space you’ve allotted it to. It measures 98 inches wide and 32.5 inches high when fully extended.

​Dewalt DWX726 is great for work, as it offers adjustable infeed and outfeed supports so it can handle up to 8 feet of material. Thanks to its durable tubular steel construction, its maximum weight capacity is at 300 pounds.

This rolling miter saw stand is quite a tough stand, and it comes with a 3-year warranty. Because of its portability, strength, and compatibility with most sliding miter saws, this is great for DIY-ers and professional contractors alike.

rolling miter saw stand
2.	Bosch GTA3800 Folding Leg Miter Saw Stand

Editor Rating:

​Bosch GTA3800 is another popular miter saw stand that has earned perfect marks in just about all the customer reviews. It may be the most expensive stand on this list, but you sure get your money’s worth.

First of all, this is compatible with most miter saws. It adjusts to fit in saws of various sizes.

Bosch GTA3800

It even matches up with miter saws with irregular bolt patterns, such as the Hitachi C12RSH. With the quick-release lock, you can attach and detach the saw to and from the stand easily and quickly.

Once the dual sliding rails are fully extended, it will reach a length of 12 feet and 9 inches, so it can support up to 16 feet of material.

So you need to make user that you have the workspace to accommodate this. ​Bosch GTA3800 quite helpful for your work, as it offers a fast and easy setup so you can make repetitive cuts of the same length.

If you’re planning to bring this to another location, all you need to do is to fold the legs up so it’s like a folded umbrella or camera tripod.

You can then just grab the handle to carry it with one, as it only weighs about 58 pounds. You can also move the stand along with the attached saw as it features 2 wheels on one end.

All in all this is a handy stand that should accommodate miter saws designed to match up with stands. (Some can’t, as they’re only designed for bench tops).

The aluminum construction makes it both strong and light and it should last you for a long while. ​Bosch GTA3800 comes with a standard 1-year warranty.

Bosch GTA3800

Hitachi UU240F Heavy-Duty Portable Miter Saw

Editor Rating:

What if you’re working with huge miter saws and heavy materials? If that’s the case, then the Hitachi UU240F may be best for you.

It’s really designed for heavy-duty work, and the tough steel used for its construction can support up to 400 pounds. It can accommodate even large 12-inch miter saws.

It has universal auxiliary mounting brackets so you won’t need an extra mounting surface. It’s easy enough to mount and remove the saw from the stand, because of the quick-release brackets.

It also has non-marring rubber feet on the mounting brackets. This means you can remove the saw from the stand and you can put the saw on any finished surface, and you won’t scratch the finish.

The stand weighs 50 pounds, but you really don’t have to carry it except when you put it in and out of your vehicle.

On one end you have 2 wheels that measure 8 inches in diameter, while the other end has a convenient handle. So you’ll just need to pull it to where you want to put it.

When you’re using this stand, the work supports can extend up to 95.5 inches, so you can accommodate longer material if you ever need it.

The setup is easy and fast, and you don’t even need tools. You also have installed adjustable material stops so you can make accurate cut repetitively.

As for durability, don’t worry. After all, this stand can handle up to 400 pounds, remember? The warranty is for 5 years, and in all probability ​​Hitachi UU240F can last much longer than that. It’s very affordable too.

Bosch GTA3800
Folding Miter Saw Stand PM-4000 Portamate

Editor Rating:

​PM-4000 Portamate folding miter saw stand  from HTC is the most affordable stand on this list, and you can probably understand that when you see its very basic design.

Yet even though it doesn’t have the bells and whistles you can find in other stands, it offers a lot of features that you’ll surely appreciate.

PM-4000 Portamate folding miter saw stand

​HTC PM-4000 designed for just about every make and model of miter stand in the market today. With the quick-mount tool attachments, it’s very quick and easy to attach and detach the saw.

Though the price is apt for budget-conscious home users, the quality of the stand is actually contractor grade.

The tubular steel construction is designed to handle up to 500 pounds of material. With the material supports extended, you can support 116 inches of material. That’s about 10 feet long.

It comes with a tough powder-coated finish, while the foldout legs offer total stability while you work.

The height of the stand is also set at 36 inches high, which is an optimal height for most people and most projects.

It’s also very portable, as you can just fold the legs when you carry it. If you want, you can also buy the upgrade so you can move it along on two 6-inch wheels.

As it is, it’s the perfect miter saw stand for no-nonsense workers. It’s tough, stable, and extremely affordable.

DEWALT DWX723 Heavy Duty Miter Saw Stand

Editor Rating:

​Dewalt DWX723 isn’t the most expensive stand on this list. But many will think that it ought to be, after seeing the quality and the many useful features of the stand.

This is a truly fine miter saw stand that upholds the Dewalt reputation for high quality.

First off, it comes with a universal design. This means it works with all miter saw brands and models.

The mounting brackets the saw uses makes it easy for you to attach and detach the saw, and while attached the saw is securely held in place. In fact, the brackets lets you put in 2 saws on the stand simultaneously.

The beam extends so that it can support up to 16 feet of material. It even has flip up material cut stops. This is a tough stand that can handle up to 500 pounds.

You also have non-marring feet on the tool mount, so the material won’t get scratched or damaged. The leg log levers keep the setup easy and the stand stable.

When fully extended, the stand is 32 inches high and 150 inches wide. But you can fold it so it’s only 6 inches high and 73 inches wide.

You shouldn’t have any trouble carrying this around, as the stand only weighs a mere 35 pounds.

This will last for a very long time. ​Dewalt DWX723 comes with a 3-year warranty and a year of free service. It also comes with a 90-day money-back guarantee.

Final Verdict

It should be obvious by now that you really need the best ​ miter saw stand for your workshop. With the right stand, you can make full use of your miter saw, and you can also bring it along to your various jobsites.

Whether you’re a home DIY enthusiast or a professional contractor, you need one right now if you’re going to use a miter saw.

Alvin V. Stone

Product reviewer & passionate blogger. Beside writing for this blog, I spend my time crafting research based contents for HuffingtonPost, Lifehacker & Forbes!

Click Here to Leave a Comment Below 0 comments