The Guide to the Best Compact Sliding Miter Saws in 2017

 Are you looking for the best compact sliding miter saw? Here are some reviews of the models you need to look over. A lot of full-featured miter saws are huge, which offers a lot of stability to keep the cuts accurate and true.

But many also prefer to find the best compact sliding miter saw instead. Their compact size doesn’t occupy as much workspace, and they’re also much more portable.

You don’t have to worry about being limited to working on very small work pieces either. With the slider feature, you can deal with much larger work pieces than what the miter saw base can normally support.

So how do you find the most ideal sliding miter saw with compact measurements? You can start with this list of miter saws we have compiled for you. These may be small, but you’ll find that they’re far from terrible.

Recommended Best Compact Sliding Miter Saws

Craftsman 10" Single Bevel Sliding Compound Miter Saw

Editor Rating:

So let us start with this Craftsman 10-inch compound miter saw with a single bevel and sliding features.

This is quite light in weight at just 39.38 pounds, so moving it from one spot to another in your workshop should be a snap. That’s because it mostly uses aluminum, which is strong yet light.

It’s also compact when you slide in the extensions back. It also features a rail slide lock, which keeps the saw from sliding. This is crucial when the miter saw is in storage or while you’re transporting it.

You can even lock it in place while you’re working, and you can you the miter saw as a chop saw that won’t slide. With the sliding arms fully extended, you get a table that’s 38.25 inches wide and 13.375 inches deep.

The saw also slides on an extending mount, so you can really work with wider work with wider work pieces.

With this, you can spin through boards measuring 12 inches wide. The motor is powerful enough to get the 10-inch blade spinning at a robust rate 4,800 rpm.

This lets you deal smoothly even with hardwood, and you can end up with tight corners and very sharp edges.

For bevel cuts you can only go 45 degrees to the left, but that’s sufficient for lots of woodcutting workers.

At 45 degrees, you can go through lumber measuring 1⅝ by 12 inches. You can also get up to 50 degrees for both the left and right sides for miter cuts.

The cutting capacity lets you deal with 3⅝ by 8 inches for 45-degree miter cuts, and with 1⅝ by 8 inches when you’re making 45-degree miter and bevel cuts.

Despite the compact size, you get a lot of features here. Work indoors and you can use the laser guide so you know where your cut line is. You also have a depth stop for dados.

WEN 70716 10-Inch Sliding Compound Miter Saw

Editor Rating:

Now this is a very light weight model for a sliding compound miter saw. It only weighs 30 pounds, and that also means it is light on your wallet too.

But don’t let the light weight and the low price get you to think that it is of low quality.

Sure, this is a single bevel miter saw, so you can only tilt it to the left up to 45 degrees for bevel cuts. But it also offers miter cuts at angles up to 52 degrees to both the left and right.

This is a powerful miter saw, and its 15-amp motor sends up to 5,500 rpm of power to the 10-inch blade. This is more than enough for you to work with boards measuring 3.25 inches thick.

Despite the compact size, the sliding features also let you work with boards up to 11.5 inches deep.

This already comes with a 60-tooth blade, and the blade cover automatically retracts only when you’re using it.

The dust bag reduces your cleanup after your work. It’s quite durable, and it’s supported by a 2-year warranty.Of course, it really is portable too. It’s not just the weight and the compact design which help.

You also have a carry handle that lets you ring this tool to your worksite and then back home with no trouble whatsoever.

Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw

Editor Rating:

Now if you value the quality and the features as your top priority over the price, then the Bosch GCM12SD is a great option that you can’t overlook.

It may be a tad expensive, but it’s more than a tad useful. As this uses a 12-inch blade, it’s heavier than its 10-inch counterparts. Still, the weight isn’t all that bad at 65 pounds.

But it could have been heavier and bulkier, except that it doesn’t use a regular rail design. Instead, it uses the exclusive Bosch Axial-Glide system which makes it possible for this miter saw to occupy 12 inches less workspace.

This glide system offers total control over the cutting action, so you can get smooth cuts, superior alignment, and wider crosscuts. This uses a 15-amp motor that sets the 12-inch blade spinning at 3,800 rpm.

You’re able to get accurate cuts since the transparent lower guard lets you have a clear view of the cutline.  With this, you can make 14-inch horizontal cuts.

The vertical capacity is at 6.5 inches when the work piece is set against the fence, and the nested crown capacity is also at 6.5 inches at 45 degrees.

If you’re making bevel cuts, then the dual bevel feature will make things easier. You can cut at angles up to 47 degrees on both the left and right sides, with bevel detents at 0, 33.9, and 45 degrees.

All in all, this is compact enough for cramped workshops, because there’s really no need for extra space for rear clearance.

You can also bring this along to a job site, although it helps if you have another person helping you to lift it.

Rousseau 5000 Dust Solution for Miter Saws

Editor Rating:

What if you don’t really need a compact miter saw? What if instead you need compact dust collector system that you can bring to a worksite to minimize the cleanup after the work?

If that’s the case, then you’re looking for something like the Rousseau 5000.

This is a US-made dust collector solution that folds easily into a convenient carry bag. You can use this for all types of miter saws and at all the different angles.It works simply by putting the hood up around the miter saw.

This high-density nylon hood captures the sawdust and then directs the airflow towards the 4-inch vacuum port. That makes it easy for your installed vacuum system to capture the dust as you work.

This system also features interior baffles that keep the fine dust from escaping.So if you’re working with a miter saw at home and at your various job sites, bring this along with you.

Lots of excellent miter saws come with mediocre dust collection systems. With the Rousseau 5000, you can capture heavy and find saw dust as you work, so that you only need minimal cleanup afterwards. No muss, no fuss.

Makita LS0815F 8-1/2" Slide Compound Miter Saw

Editor Rating:

So let’s get back to compact miter saws. If you really want something compact and light, then perhaps even the miter saws with 10-inch blades may be too much.

But with this 8.5-inch miter saw, you get something smaller and lighter. It only weighs 31.1 pounds, so you can carry this on your own to your jobsite.

It’s powered by a 10.5-amp motor that’s strong enough to get the blade spinning at a rate of 5,000 rpm. It features a soft start for smooth start-ups, and there are no belts to worry about.

It also comes with an electric brake so you don’t waste time waiting for the blade to stop spinning. For bevel cuts, you get up to 48 degrees to the left, plus another 5 degrees to the right.

You get 12 inches of crosscutting capacity at 90 degrees, and 8.5 inches capacity at 45 degrees. It miters up to 50 degrees to the left and 60 degrees to the right, with miter detents at 0, 15, 22.5, 31.6, 45, and 50 degrees.

To the right, there’s an extra detent at 60 degrees too.It’s very easy to use, as you have an LED light that illuminates your cutline. You also get a good view of the blade and the cutline due to the transparent blade guard system.

It has a large trigger switch that makes it easier to start. It fits nice and comfortably in your hand, as the horizontal D-handle is rubberized and ergonomic.

Final Verdict

As you can see, you always have the option of bringing along your own miter saw to your jobsite if you want.

With the best compact sliding miter saw with you, you can do woodcutting jobs more easily and more quickly. With the right dust collection system, even the cleanup afterwards is easier too.

Alvin V. Stone
 

Product reviewer & passionate blogger. Beside writing for this blog, I spend my time crafting research based contents for HuffingtonPost, Lifehacker & Forbes!

Click Here to Leave a Comment Below 0 comments