Find the Best 12-Inch Sliding Compound Miter Saw in 2017 – Guide & Reviews

It’s not surprising if you’re looking for a good sliding compound miter saw for your DIY woodcutting projects.

After all, a compound miter saw offers both miter and bevel cuts that work well for trim pieces like crown molding. With the sliding feature, you can also handle larger widths for your work pieces.

But you may find yourself looking for the best 12-inch sliding compound miter saw instead of the usual 10-inch model.

With a 12-inch saw blade, it’s possible to cut through larger materials with a single pass while you’ll need 2 cuts from a 10-inch blade.

These miter saws tend to be more durable and more powerful too, and the cuts can be much smoother. This is great if you’re concentrating on fine woodworking.

Finally, it may even be possible to just switch out the 12-inch blade with a 10-ich blade, so you can really have the best of both worlds.

Here are some 12-inch miter saw models that can make your woodcutting projects a lot easier:

 Recommended Best 12-Inch Sliding Compound Miter Saws

DEWALT DWS709 Slide Compound Miter Saw

Editor Rating:

The Dewalt brand name usually comes with a higher price tag, and the DW709 isn’t an exception to that rule.

But then again, the Dewalt brand also has a well-earned reputation for quality, and the DW709 is a fine example of that too.

Here you have a powerful 15-amp motor that supplies 3,800 rpm of power to the 12-inch blade. Combined with the innovative back fence design, this miter saw allows you to cut through 2 by 10-inch lumber at 45 degrees.

At 90 degrees, you can cut through lumber measuring 2 by 14 inches. The sliding fences also allow you to work on 4.5-inch base molding and 5.5-inch crown molding.

The miter range to the left reaches up to 50 degrees, and it ranges up to 60 degrees to the right.

You can make fast adjustments easily since you can choose from 13 different miter detents. The accuracy of the cuts is quite dependable, since you have a huge red miter pointer on the easy to read miter scales.

The same holds true for the large bevel scale as well. Finally, this miter saw features dual horizontal steel rails and linear ball bearings for greater accuracy for your cuts.

This miter saw is very stable and strong, due to the heavy-duty aluminum base and the tall ribbing.

There are even pads on the stainless steel plates that can significantly reduce the regular wear and tear over time.

So you can expect the DW709 to work well for a long time, and that’s backed by a 3-year limited warranty.

Hitachi C12RSH2 15-Amp 12-Inch Dual Bevel Saw

Editor Rating:

The Hitachi brand is also another premium name in the business, and they’re known to make very durable miter saws.

That’s why you usually have a warranty period for up to 5 years. During that time, you’ll appreciate the various benefits offered by the C12RSH2 design.

The sliding system is very compact, and the way the saw head slides along the fixed rails removes 12 extra inches from the footprint of the unit.

It’s equipped with a 15-amp motor, so you have the power and the large blade to deal with thicker and larger pieces.

With the sliding fence feature, you can work on crown molding measuring up to 7.5 inches. The miter angle range to the left is 45 degrees, and to the right it reaches up to 57 degrees.

It also offers a wide range of bevel cuts, with up to 45 degrees on both the left and right sides.It’s very easy to make bevel and miter adjustments, since the scales are large and easy to read.

You also get greater accuracy for your cuts because of the built-in laser marker. This miter saw is also very comfortable and easy to hold.

The elastomer grip makes it soft to the touch, and it even reduces the level of the vibrations that reach your hand.

This is a great choice for many, as it’s very dependable, useful, and easy to use. Just double check the warranty period, so you can confirm how long it’s supposed to last.

WEN 70712 12-Inch Sliding Compound Miter Saw

Editor Rating:

This is a very affordable sliding compound miter saw, so it shouldn’t be too hard on your budget.

At the same time, you get all the miter saw features you need so you can really work on your woodcutting projects more efficiently.

It’s powered by a 15-amp motor that delivers an impressive 5,000 rpm of slicing capacity for the 12-inch blade.

It already comes with a nice blade with 40 carbide-tipped teeth, and you also have a dust bag that collects most of the sawdust you produce.

The design lets you work on wood boards that are up to 3.5 inches thick and 11.75 inches long.

The work table offers a lot of room, which can accommodate up to 120 square inches of depth. The workpiece support arms can also extend out to support up to 32 total inches of work material.

You also have positive stops at 0, 15, 22.5, 31.6, and 45 degrees in both directions. In addition, it also bevels up to 45 degrees to the left.

So all in all, you get all the features you need at a very low price. It even comes with a 1-year warranty, and WEN customer support department is quite helpful in assisting with various issues and problems.

Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw

Editor Rating:

Admittedly, the Bosch GCM12SD is quite a pricey model, but then again you really do get your money’s worth.

It’s equipped with a robust 15-amp motor that delivers 3,800 rpm, and it comes with a 1-year warranty.

It can work with lots of different blade models, and the transparent lower guard for the blade lets you see the cut line more clearly.

The power of this miter saw offers you a horizontal cutting capacity for up to 14 inches, while the vertical capacity is at 6.5 inches. It also lets you work on crown molding measuring up to 6.5 inches.

The sliding extensions also allow you to work on materials up to 40 inches long.This model is fitted with an innovative glide system that offers a smooth glide to your cuts, wider crosscuts, and improved alignment.

Yet it cuts up to 12 inches of workspace because it doesn’t use a regular rail system. Instead, it uses a special fence system that aligns at 90 degrees to your table without having to make any adjustments.

The fences also use a quick-release one-touch feature for locking and unlocking so you can slide the fence easily into their proper position.

For bevel cuts, you can get angles ranging up to 47 degrees to both the left and the right. The dual bevel scale is very easy to read, and the bevel detents are set at 0, 33.9, and 45 degrees on both sides.

12 Inch Double-Bevel Sliding Compound Miter Saw

Editor Rating:

This 12-inch miter saw from Chicago Pneumatic is also affordable, yet it comes with features that can match up with more expensive models.

It’s equipped with a 15-amp motor that gets the 12-inch blade moving at 3,800 rpm.

With this miter saw, you can really make very precise cuts smoothly. It features dual linear slide rails that improve the stability and the smoothness of the cuts.

In addition, pressing the trigger also automatically activates the laser guide system so you can cut more accurately.The miter capacity lets you cut through 3.5 by 9.5-inch work pieces at 45 degrees.

You have miter stops at 0, 15, 22.5, 30, and 45 degrees for quick and easy adjustments. For bevel cuts, you also get a range of up to 45 degrees to the left and right.To get the best results, you will have to replace the blade straight away.

That shouldn’t be a problem, since the low cost of the Chicago Pneumatic miter saw means that you should have lots of money left for a high quality 12-inch blade.

With the power of the motor and the convenience of the miter and bevel features, your new blade should work wonders with your various woodcutting projects.

Final Verdict

As you can see, if you do need a larger blade for your sliding compound miter saw then you have several excellent options to choose from. Any of these models can make your life a lot easier when you’re working on your woodcutting projects.

With the best 12-inch sliding compound miter saw in your workshop, the work gets done faster and better.

Alvin V. Stone
 

Product reviewer & passionate blogger. Beside writing for this blog, I spend my time crafting research based contents for HuffingtonPost, Lifehacker & Forbes!

Click Here to Leave a Comment Below 0 comments